topic RE: Multicast in AP-7522E in ExtremeWireless (WiNG)

Multicast in AP-7522E

Long_Tran — Wed, 27 Sep 2017 14:11:00 GMT

Hi all,
I want to configure multicast (igmp snooping) in AP-7522E. But I can't find a guide to configure it.
Help me, Plese!
Thanks

RE: Multicast in AP-7522E

David_Choi — Wed, 27 Sep 2017 14:14:00 GMT

You can configure igmp snooping under the AP profile.

RE: Multicast in AP-7522E

Long_Tran — Wed, 27 Sep 2017 15:37:00 GMT

Hi David Choi,
I don't have Wireless Controller. And 7522E can't configure in Enterprise Guide or CLI. i read guide "WiNG Express Manager 5.8.2", but it does not have IGMP snooping.

Link "WiNG Express Manager 5.8.2": http://documentation.extremenetworks.com/ExtremeWireless/WING_EXPRESS_MANAGER_5.8.2_UG_MN-002678-01_...

RE: Multicast in AP-7522E

Christoph_S — Wed, 27 Sep 2017 23:21:00 GMT

SSH into the AP and run the following commands to see if it's already enabled by default:

>show run include-factory | include ip igmp or >show context include-factory | include ip igmpYou should see something like this: ip igmp snooping
ip igmp snooping forward-unknown-multicast
no ip igmp snooping querier
ip igmp snooping querier max-response-time 10
ip igmp snooping querier timer expiry 60
ip igmp snooping querier version 3
ip igmp snooping querier query-interval 60
ip igmp snooping querier robustness-variable 2
no ip igmp snooping fast-leaveWhat do you get when you run these commands?

RE: Multicast in AP-7522E

Long_Tran — Thu, 28 Sep 2017 12:45:00 GMT

Hi Christoph,
I show in 7502E :

ap7502-75F4C5>show run include-factory | include ip igmp
ip igmp snooping
ip igmp snooping forward-unknown-multicast
no ip igmp snooping querier
ip igmp snooping querier max-response-time 10
ip igmp snooping querier timer expiry 60
ip igmp snooping querier version 3
ip igmp snooping querier query-interval 60
ip igmp snooping querier robustness-variable 2
no ip igmp snooping fast-leave

--> igmp snooping always enable?

RE: Multicast in AP-7522E

Christoph_S — Thu, 28 Sep 2017 19:26:00 GMT

Igmp snooping is not enabled by default. There is no option to enabled this setting from GUI or CLI on Express units. This can be enabled on Enterprise, but not Express APs. Have you tried enabling this setting on your switch?

Thank you.