https://community.extremenetworks.com/t5/extremewireless-wing/how-to-setup-active-standby-configuration-of-vx-9000-controller/m-p/24891#M2285 Hi <BR /> <BR /> The following knowledge article below should help with your query.<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-problems" target="_blank" rel="nofollow noreferrer noopener"><B>How to configure a cluster in ExtremeWiNG Controllers on WiNG5.4 and above</B></A> Mon, 22 Apr 2019 20:03:00 GMT Daren_E 2019-04-22T20:03:00Z https://community.extremenetworks.com/t5/extremewireless-wing/how-to-setup-active-standby-configuration-of-vx-9000-controller/m-p/24890#M2284 We have one VX-9000 controller which is having around 800 access points. in this scenario there is no standby controller now we are going to configure the standby controller with current setup.<BR /> <BR /> If active controller goes down automatically standby should take care of active role.<BR /> <BR /> How does AP know standby controller IP and how do we setup this configuration. <BR /> <BR /> Kindly help us to do with this current scenario Fri, 19 Apr 2019 12:19:00 GMT https://community.extremenetworks.com/t5/extremewireless-wing/how-to-setup-active-standby-configuration-of-vx-9000-controller/m-p/24890#M2284 Srinivas_K1 2019-04-19T12:19:00Z https://community.extremenetworks.com/t5/extremewireless-wing/how-to-setup-active-standby-configuration-of-vx-9000-controller/m-p/24891#M2285 Hi <BR /> <BR /> The following knowledge article below should help with your query.<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/Wireless-problems" target="_blank" rel="nofollow noreferrer noopener"><B>How to configure a cluster in ExtremeWiNG Controllers on WiNG5.4 and above</B></A> Mon, 22 Apr 2019 20:03:00 GMT https://community.extremenetworks.com/t5/extremewireless-wing/how-to-setup-active-standby-configuration-of-vx-9000-controller/m-p/24891#M2285 Daren_E 2019-04-22T20:03:00Z