https://community.extremenetworks.com/t5/extremewireless-wing/dynvc/m-p/16000#M244 Hello guys, How can I manually set up (with CLI) the VC as a primary or secondary ? Thanks Sun, 07 Oct 2018 23:39:00 GMT Aviv_Kedem 2018-10-07T23:39:00Z https://community.extremenetworks.com/t5/extremewireless-wing/dynvc/m-p/16000#M244 Hello guys, How can I manually set up (with CLI) the VC as a primary or secondary ? Thanks Sun, 07 Oct 2018 23:39:00 GMT https://community.extremenetworks.com/t5/extremewireless-wing/dynvc/m-p/16000#M244 Aviv_Kedem 2018-10-07T23:39:00Z https://community.extremenetworks.com/t5/extremewireless-wing/dynvc/m-p/16001#M245 Aviv, <BR /> <BR /> The Dynamic VC feature allows for automatic failover between several potential VCs. The election is based on the RF Domain Manager process, where the most powerful AP model wins. If the candidates are of the same model (recommended) then the one with the lowest MIND ID wins.<BR /> <BR /> This can be modified by setting the <B>rf-domain-manager priority</B> value in the AP's SELF section.<BR /> <BR /> So, if you have two AP8533 that are VC candidates, giving the one you want as Master a higher priority should do the trick:<BR /> <BR /> ap8533 B8-50-01-17-8C-90<BR /> virtual-controller<BR /> virtual-controller auto<BR /> virtual-controller management-interface ip address 172.16.3.99/24<BR /> rf-domain-manager capable<B><BR /> rf-domain-manager priority 100 </B><BR /> ap8533 B8-50-01-2C-35-A0<BR /> virtual-controller<BR /> virtual-controller auto<BR /> virtual-controller management-interface ip address 172.16.3.99/24<BR /> rf-domain-manager capable<BR /> rf-domain-manager priority 10<BR /> <BR /> Wed, 17 Oct 2018 22:31:00 GMT https://community.extremenetworks.com/t5/extremewireless-wing/dynvc/m-p/16001#M245 Daniel_Flouret 2018-10-17T22:31:00Z