topic RE: How to configure GE port of wing controller VX9000? in ExtremeWireless (WiNG)

How to configure GE port of wing controller VX9000?

Niyas — Wed, 08 Aug 2018 13:22:00 GMT

Hi,

I have one doubt, my controller IP is 10.4.4.41/22 with VLAN 14 and my data VLAN is 18.controller is running on VMware platform with only one GE port.so how to configure ge1 port of controller?

Please find the below settings, this is correct or not

Native VLAN 14 with IP:10.4.4.41/22
Mode : Trunk
Allowed VLAN: 18,20,22,24,33,34

Thanks
Niyas P

RE: How to configure GE port of wing controller VX9000?

Yas — Wed, 08 Aug 2018 13:30:00 GMT

Hi!
I'm not sure about that... Niyas
it's in the AP profile that the ports have to be in trunk mode
not on the controller.
The flow goes through the APs.
as the example below

profile ap7522 default-ap7522
ge1 interface
switchport mode trunk
switchport trunk native vlan 1
no switchport trunk native tagged
switchport trunk allowed vlan 1,4,14

RE: How to configure GE port of wing controller VX9000?

Niyas — Wed, 08 Aug 2018 13:36:00 GMT

Hi,

Please find the below screenshot.This is the controller GE port

RE: How to configure GE port of wing controller VX9000?

Andrew_Blomley — Wed, 08 Aug 2018 15:40:00 GMT

The vx9000 does not have a data plane so no user data is tunnelled via vx9000, user data should be bridged on the access points as explained in the earlier post The port on the VX should therefore be set as access on vlan 1 This port is then bridged to the virtual switch within VMware The VX only requires a single vlan and single IP address This interface is for control traffic only. Please note if this interface is changed the vx9000 will require to be relicensed. Regards Andy

RE: How to configure GE port of wing controller VX9000?

Niyas — Wed, 08 Aug 2018 16:21:00 GMT

Hi,

Suppose my management VLAN is 14 and IP address 10.4.4.41/22.I need to set only this VLAN and IP address in GE1 port?.and what about virtual interfaces?

Thanks
Niyas P

RE: How to configure GE port of wing controller VX9000?

Aviv_Kedem — Wed, 08 Aug 2018 16:21:00 GMT

Hello Niyas,

For what you need these additional VLANS on VX?

Aviv