topic RE: How to adopt AP 7502 to wing controller vx9000 in ExtremeWireless (WiNG)

How to adopt AP 7502 to wing controller vx9000

Niyas — Sat, 04 Aug 2018 19:47:00 GMT

Hi, we have Extreme AP 7502 and Wing controller vx9000,we need to adopt AP 7502 to controller vx9000.

RE: How to adopt AP 7502 to wing controller vx9000

Max_McGrath — Sat, 04 Aug 2018 20:15:00 GMT

Hi Niyas -

I run this setup in my environment; two VX9000s (Primary and Seconday) and 600+ 7502s. We do the following:

Use DHCP reservations for the APs to pull an IP address
Use DHCP option 191 for the APs to discover the contoller (see section 2.8 of http://www.michaelfmcnamara.com/files/motorola/WiNG_5X_How_To_NOC.pdf)
Create an AP7502 profile in WiNG. Configure the Controller Hostnames option under the Adoption page.
Create an Auto-Provisioning Policy to have the AP7502s automatically pull the proper profile to self-configure.

Hope this helps.

Max

RE: How to adopt AP 7502 to wing controller vx9000

Niyas — Sat, 04 Aug 2018 20:15:00 GMT

we are using standalone access points

RE: How to adopt AP 7502 to wing controller vx9000

Wei_Liang_Loh — Sat, 04 Aug 2018 20:15:00 GMT

Hi Niyas,

Good day to you,

Doesn't matter whether it is standalone access point, if you want to adopt AP7502 to VX9000 controller, you can follow the steps suggested by Max.

Thank you

RE: How to adopt AP 7502 to wing controller vx9000

RobertZ — Sun, 05 Aug 2018 04:03:00 GMT

Here are the WiNG 5.X - Best Practices and Recommendations

RE: How to adopt AP 7502 to wing controller vx9000

Niyas — Sun, 05 Aug 2018 09:50:00 GMT

Hi,

we are using standalone Access points