topic RE: WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license in ExtremeWireless (WiNG)

WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

William_FEO — Fri, 02 Nov 2018 14:17:00 GMT

Hello everyone,

I recently purchase a VX9000 controller, 2 AP8432 access points and a VX9000 Appliance Licence.

I configure some task on the controller :

Profiles (VX9000 & AP8432)
Auto-Provisionning (adopt any ap8432)
RF Domain (VX-Domain & User-Domain)

When I switch on the AP8432 and I connect on to it with SSH, I write the following command :

self
controller ip X.X.X.X level 2
commit write mem

If I check the AP log, I get the following error :

2018-10-29 11:16:57:Adoption state change: 'Waiting for cfgd OK' to 'Adoption failed': rejected due to adoption license

Could someone help me to solve this problem because we cannot use the VX controller.

Regards,

RE: WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

Wei_Liang_Loh — Fri, 02 Nov 2018 14:24:00 GMT

Hi William,
Did you activated your Appliance License and applied on your VX?

If not you can refer to link below on how to activate your VX appliance license
https://extreme-networks--c.na29.visual.force.com/apex/KCSInternal?srKp=ka1&id=kA134000000GwRx&a...

And apply in your controller.

RE: WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

William_FEO — Fri, 02 Nov 2018 14:42:00 GMT

Hi Wei,

You were right, I haven't activate the Appliance Licence. Now it's working

Thank's a lot.

RE: WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

Wei_Liang_Loh — Fri, 02 Nov 2018 14:42:00 GMT

You're welcome.

RE: WiNG 5.9.2.4-004R VX9000 & AP8432 : 'Adoption failed': rejected due to adoption license

Christopher_Fra — Wed, 14 Nov 2018 02:28:00 GMT

For layer-3 adoption, the correct CLI syntax is:

controller host xxx.xxx.xxx.xxx level 2 [enter] (x represents controller IP for adoption)