https://community.extremenetworks.com/t5/extremewireless-wing/ap510i-wr-how-to-set-for-ekahau-survey/m-p/52648#M3017 Easily done sir; just read <A href="https://extremeportal.force.com/ExtrArticleDetail?an=000078761" target="_blank" rel="noopener">this article</A> from right here in the HUB.<BR /><BR />The process is also documented in the Access Point System Reference Guide<SPAN></SPAN>.<BR /><BR />As far as your "AP on a stick" testing is concerned: Device/Radio settings are done exactly as they are in adopted, VC, or standalone modes.<BR /><BR />&nbsp;&nbsp; - Good Luck, Mike<BR /><BR /> Fri, 18 Feb 2022 11:55:00 GMT Mike_Lane 2022-02-18T11:55:00Z https://community.extremenetworks.com/t5/extremewireless-wing/ap510i-wr-how-to-set-for-ekahau-survey/m-p/52647#M3016 Hello<BR /><BR />I need to know if it's possible to configure AP510I-WR as standalone AP mode to using for surveying with Ekahau.<BR />We could place in the room without any network connection and measure with Ekahau the real RF emission in rooms for 2,4 and 5GHz.<BR /><BR />Thanks<BR /> Thu, 17 Feb 2022 13:34:00 GMT https://community.extremenetworks.com/t5/extremewireless-wing/ap510i-wr-how-to-set-for-ekahau-survey/m-p/52647#M3016 PasqualeC 2022-02-17T13:34:00Z https://community.extremenetworks.com/t5/extremewireless-wing/ap510i-wr-how-to-set-for-ekahau-survey/m-p/52648#M3017 Easily done sir; just read <A href="https://extremeportal.force.com/ExtrArticleDetail?an=000078761" target="_blank" rel="noopener">this article</A> from right here in the HUB.<BR /><BR />The process is also documented in the Access Point System Reference Guide<SPAN></SPAN>.<BR /><BR />As far as your "AP on a stick" testing is concerned: Device/Radio settings are done exactly as they are in adopted, VC, or standalone modes.<BR /><BR />&nbsp;&nbsp; - Good Luck, Mike<BR /><BR /> Fri, 18 Feb 2022 11:55:00 GMT https://community.extremenetworks.com/t5/extremewireless-wing/ap510i-wr-how-to-set-for-ekahau-survey/m-p/52648#M3017 Mike_Lane 2022-02-18T11:55:00Z