topic RE: Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs. in ExtremeWireless (WiNG)

Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

Erick_Hill — Wed, 22 Aug 2018 02:18:00 GMT

WING Controller and APs

RE: Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

Christopher_Fra — Wed, 22 Aug 2018 02:26:00 GMT

Hello Erick,
Can you tell me what screen on the VX UI you are referencing?

RE: Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

Erick_Hill — Wed, 22 Aug 2018 02:37:00 GMT

Hope this is telling enough...WING 5.8, Operations TAB

RE: Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

Ondrej_Lepa — Wed, 22 Aug 2018 02:37:00 GMT

Hi Erick,

taken from System Reference Guide (GUI - Operations - Smart RF)
Smart Sensor defines whether a listed Access Point is smart sensor on behalf of the other Access Point radios comprising the RF Domain Then I assume this refers to Smart-RF operated state which is

normal - Radio broadcasts
offline - Radio does not broadcast (shut down or fulltime sensor)
sensor - Radio actively measures RF during calibration

Regards,
Ondrej

RE: Can anybody tell me what the 'Smart Sensor' column on the VX controller GUI references? It shows all red Xs.

Aroon_Thongyod — Wed, 30 Oct 2019 23:51:00 GMT

Hi all , How to enable “Smart Sensor” on access point profile ?

I trying to find this feature butt not found .