topic RE: How can I restrict client with static IP address??? in ExtremeWireless (WiNG)

How can I restrict client with static IP address???

ARUN_SHARMA — Wed, 08 Nov 2017 16:04:00 GMT

How can I restrict client with static IP address on extreme wing wireless network?I want to allow only DHCP client and restrict client with static IP.Can I do this in extreme wing wireless???

RE: How can I restrict client with static IP address???

Ondrej_Lepa — Wed, 08 Nov 2017 16:28:00 GMT

Hi Arun,

you can enforce DHCP for wireless clients
VX(config-wlan-DHCP)*#enforce-dhcp enforce-dhcp Drop packets from Wireless Clients with static IP address Regards,
Ondrej

RE: How can I restrict client with static IP address???

Ondrej_Lepa — Wed, 08 Nov 2017 16:28:00 GMT

Here is an brief article about the configuration

How to restrict static IPs amongst WiNG wireless clients?

Regards,
Ondrej

RE: How can I restrict client with static IP address???

ARUN_SHARMA — Wed, 08 Nov 2017 16:33:00 GMT

Hi Ondrej,

Thanks for your quick reply.

I'll check and update.

Thanks!!!

RE: How can I restrict client with static IP address???

RobertZ — Wed, 08 Nov 2017 19:38:00 GMT

Hi Arun;
Here is the WiNG Best Practice doc for your reference.

RE: How can I restrict client with static IP address???

Christopher_Fra — Wed, 08 Nov 2017 22:13:00 GMT

From the wireless controller GUI, proceed to the following to 'enforce DHCP client only'

Configuration
Wireless
Wireless LANs
Edit WLAN
Client Settings
Enforce DHCP Client Only (check mark box, disabled by default)
OK
Commit and Save