topic RE: AP 7161 in ExtremeWireless (WiNG)

AP 7161

Wicaksono_Arief — Fri, 10 Feb 2017 16:31:00 GMT

Hi All...
I have a question about Motorola Access Point 7161.
How to connect two device AP 7161 with 5GHz Frequency use WiNG 5.5 GUI ?

RE: AP 7161

Ondrej_Lepa — Fri, 10 Feb 2017 17:46:00 GMT

Hi Wicaksono,

could you be a little more specific?
You are looking for a way to create wireless bridge between two APs, right?
For this we recommend to use MeshConnex policy (MCX) and map it as BSS1 on 5GHz enabled radio.

However I have WiNG 5.8 running the process is almost the same.
Go to Configuration - Wireless - MeshConnex Policy

Then under Configuration - Devices / Profile - Interfaces - Radio2 - WLAN / MESH mapping assign the MCX you created

If you need more details please refer to WiNG 5.5 Reference Guide or take a look into MeshConnex Overview document available under following link

Edit: Here is document for Virtual Controller environment

Regards,
Ondrej

RE: AP 7161

Ondrej_Lepa — Fri, 10 Feb 2017 17:46:00 GMT

Wicaksono,

I forgot one important thing - you need to map the MeshConnex policy to a device / profile.

Please let me know if you have any issues with your deployment.

Regards,
Ondrej

RE: AP 7161

Tuan_Nguyen1 — Fri, 12 May 2017 08:31:00 GMT

Hello friends

Where can I download firmware win 5.7 for Ap 7161

RE: AP 7161

Ondrej_Lepa — Fri, 12 May 2017 08:31:00 GMT

Hello Tuan,

feel free to reach Portal page for WiNG Access Points (End of Sale)
If you are entitled to download from this page, you'll find following

Regards,
Ondrej

RE: AP 7161

Tuan_Nguyen1 — Fri, 12 May 2017 08:31:00 GMT

Hello Ondrej Lepa

I have updated successfully fw 5.8.6.5 for Ap7161, I have configured mcx as guide but not successful, can you help me through skype or teamview?

Thank you very much

RE: AP 7161

Ondrej_Lepa — Fri, 12 May 2017 08:31:00 GMT

Tuan,

please open support case via Extreme Portal or by sending email to our inbox and we will check.

Thank you,
Ondrej

RE: AP 7161

Tuan_Nguyen1 — Fri, 12 May 2017 08:31:00 GMT

Thanks Ondrej Lepa

Please check your email, hope your support

RE: AP 7161

Tuan_Nguyen1 — Fri, 12 May 2017 08:31:00 GMT

Dear Ondrej Lepa

I can't send email direct to support@extremenetworks.com, i create case but failed. It looks like my device is no longer supported.

RE: AP 7161

Steven_Lin — Fri, 12 May 2017 08:31:00 GMT

Hello Tuan,
This error 404 because of you email haven't associated with an account or don't have an valid Service contract. But you could still open a case through email(still need to check the service contract for the tech support). Please view the GTAC user guide from below link for more detail about how to open case by email.
https://gtacknowledge.extremenetworks.com/articles/Q_A/Where-is-the-GTAC-User-Guide

RE: AP 7161

NghiaT — Thu, 30 Jun 2022 09:34:00 GMT

Hi Tuan Nguyen, can I have your contact? my email: nghiatm79@gmail.com