topic RE: show aps in floormaps in nsight in ExtremeWireless (WiNG)

show aps in floormaps in nsight

Jose_LV — Tue, 16 Jan 2018 02:13:00 GMT

Hi.

I have a vx9000 + nsight installed. I have configured several rf-domains in the tree structure and added the plans. In the nsight I see the planes correctly in the maps view tab but the aps do not appear to be able to place them. I'm forgetting something?

Thanks

RE: show aps in floormaps in nsight

aholden — Tue, 16 Jan 2018 02:16:00 GMT

hi jose

did you define the APs on the floorplan on the controllers. This is a manual process

RE: show aps in floormaps in nsight

Jose_LV — Tue, 16 Jan 2018 02:19:00 GMT

I am in that step but the aps do not appear to be able to move them directly to the floorplan

RE: show aps in floormaps in nsight

Christopher_Fra — Tue, 16 Jan 2018 02:19:00 GMT

The APs are locked on the Controller under Dashboard/Network View. There is an unlock/lock ICON on the far right-hand side to unlock/lock APs. Once done, commit/save. Same will need to be done on NSight.

RE: show aps in floormaps in nsight

Jose_LV — Tue, 16 Jan 2018 02:19:00 GMT

At the end i had to put the APs inside each rf-domain from the network view in the wing so that they would appear in the nsight and be able to drag them to their location.
Thanks Chistopher and thanks Andy.
Regards

RE: show aps in floormaps in nsight

Dan_Traian_Pope — Tue, 16 Jan 2018 02:19:00 GMT

hi,

i have a similar situation. On the same Rf domain only some APs doesn't show up to be able to drag them to the map.

Regards,

RE: show aps in floormaps in nsight

Dan_Traian_Pope — Tue, 16 Jan 2018 02:19:00 GMT

do you have any suggestions?
Thank you!