https://community.extremenetworks.com/t5/extremewireless-wing/rfs4000-doesn-t-see-another-wing-neighbors/m-p/58280#M4454 Hello, <BR /> I have 6 RFS4010 with wing 5.4 distributed in two buildings.<BR /> 4 RFS4010 are in one building and 2 RFS4010 are in the other building.<BR /> The link between buildings is a Wireless link.<BR /> I found that some RFS4010 had wing 5.4.0.0-047 and others has 5.4.2.0-030, so I decided to upgrade all to 5.4.2.0.030R.<BR /> After the upgrade, I have 2 RFS4010 which they are not adopting any AP650.<BR /> In the CLI I run this command and I get this:<BR /> rfs4000-6F908C#show mint neighbors<BR /> 0 mint neighbors of 19.6F.90.8C:<BR /> <BR /> This particular RFS4010 was not upgraded because it was with wing 5.4.2.0, so I can not understand why is not working the wing protocol on this device<BR /> <BR /> Any idea?<BR /> <BR /> Regards, Thu, 29 Nov 2018 18:36:00 GMT Pablo_Moriconi 2018-11-29T18:36:00Z https://community.extremenetworks.com/t5/extremewireless-wing/rfs4000-doesn-t-see-another-wing-neighbors/m-p/58280#M4454 Hello, <BR /> I have 6 RFS4010 with wing 5.4 distributed in two buildings.<BR /> 4 RFS4010 are in one building and 2 RFS4010 are in the other building.<BR /> The link between buildings is a Wireless link.<BR /> I found that some RFS4010 had wing 5.4.0.0-047 and others has 5.4.2.0-030, so I decided to upgrade all to 5.4.2.0.030R.<BR /> After the upgrade, I have 2 RFS4010 which they are not adopting any AP650.<BR /> In the CLI I run this command and I get this:<BR /> rfs4000-6F908C#show mint neighbors<BR /> 0 mint neighbors of 19.6F.90.8C:<BR /> <BR /> This particular RFS4010 was not upgraded because it was with wing 5.4.2.0, so I can not understand why is not working the wing protocol on this device<BR /> <BR /> Any idea?<BR /> <BR /> Regards, Thu, 29 Nov 2018 18:36:00 GMT https://community.extremenetworks.com/t5/extremewireless-wing/rfs4000-doesn-t-see-another-wing-neighbors/m-p/58280#M4454 Pablo_Moriconi 2018-11-29T18:36:00Z