DVC with internal RADIUS

Alexandr_P — Wed, 27 Oct 2021 10:17:00 GMT

Hello!

APs - AP310i with VC with internal RADIUS.
Redundancy working fine - after failure control is normally transferred to the backup controller.
But after re-election of the controller, the RADIUS server policy activation checkbox is reset (Activate RADIUS Server Policy).
As a consequence, there is a problem with authentication using 802.1x
After checking the checkbox and saving the config, everything works again.

Any ideas how to resolve this issue?

Thank you!

RE: DVC with internal RADIUS

Ovais_Qayyum — Thu, 28 Oct 2021 18:15:00 GMT

Hi,
I would suggest that you check the "Radius Server Policy" is applied on the AP310i System Profile and not the VC AP directly which will make it a device config limited only to that AP.

Regards,
Ovais

topic RE: DVC with internal RADIUS in ExtremeWireless (WiNG)

DVC with internal RADIUS

RE: DVC with internal RADIUS