topic RE: WiNG AP 7522 is not managing with WiNG VX9000 controller? in ExtremeWireless (WiNG)

WiNG AP 7522 is not managing with WiNG VX9000 controller?

Prabhu_M1 — Sat, 21 Apr 2018 16:44:00 GMT

I am unable to manage the WiNG AP7522 to WiNG VX9000 controller, I have checked the firmware version of AP and Controller even though both are having the same firmware AP is not adopting with WiNG vx900 controller

Firmware:AP7522 & VX9000 version 5.9.0.0-033R

RE: WiNG AP 7522 is not managing with WiNG VX9000 controller?

Andrew_Blomley — Sat, 21 Apr 2018 17:13:00 GMT

please run the following command of the cli of the access point

show mint mlcp history

this should tell if the ap is look for the controller

is the Ap on the same broadcast domain as the VX ?

could you also send the running config of the controller ??

Andy

RE: WiNG AP 7522 is not managing with WiNG VX9000 controller?

RobertZ — Sat, 21 Apr 2018 20:28:00 GMT

Are you sure that the AP7522 is not 'Express' version AP? Can you provide a full part number of the AP7522, you can get that via cli command ' sh version'

RE: WiNG AP 7522 is not managing with WiNG VX9000 controller?

RobertZ — Sat, 21 Apr 2018 20:28:00 GMT

Note that Enterprise VX9K will not adopt Express AP

RE: WiNG AP 7522 is not managing with WiNG VX9000 controller?

RobertZ — Sat, 21 Apr 2018 20:34:00 GMT

Try setting the controller host on the AP, here are CLI commands :

AP#self
AP(config-device )#controller host xx.xx.xx.xx
AP(config-device )#commit write

RE: WiNG AP 7522 is not managing with WiNG VX9000 controller?

Carlos_Assunção — Sun, 22 Apr 2018 12:03:00 GMT

See if the AP7522 firmware is also uploaded on the VX. Some customer mine has that same issue... the firmare is not by default on the VX.

RE: WiNG AP 7522 is not managing with WiNG VX9000 controller?

Andrew_Blomley — Sun, 22 Apr 2018 14:49:00 GMT

The VX9000 is supplied into downloadable image images

image 1) VX9000-5.9.1.4-004R.img

This is the full image contains all software images for all support access point

image 2)VX9000-LEAN-5.9.1.4-004R.img

The lean image has had the AP software images removed to reduce the size of the software build

To confirm the software images installed

please use the following command

show device-image versions

This will list all software versions installed

AP's will also adopt even if the there is a software mismatch.

show adoption status

will tell you if the aps have been adopted, if there is a software mismatch this will show here.

Finally, the VX9000 does not automatically update the firmware

to manually update firmware please use

device-upgrade all