topic How can I get IP of my APs if I forgot it ? in ExtremeWireless (WiNG)

How can I get IP of my APs if I forgot it ?

Ravi_Patel — Mon, 30 Apr 2018 22:20:00 GMT

How can I get IP of my APs if I for got it ? APs are showing online but not showing in LAN range. I have MAC address for all APs. Is there any tool which I can install and it discover all APs in the network? I have two Motorola AP 5131 and some are other model but don't know. Is there any way I can get access to my all APs without resetting all of those? Any help will be greatly appreciated. Thank you

RE: How can I get IP of my APs if I forgot it ?

Christoph_S — Mon, 30 Apr 2018 22:25:00 GMT

Hello Ravi,

These are unsupported units and as such we don't have any tool that might help you detect them. If you have the AP MAC addresses, you might want to access your DHCP server to verify which IP was leased to which MAC address.

Thank you,

Chris

RE: How can I get IP of my APs if I forgot it ?

Ismael1 — Mon, 30 Apr 2018 22:27:00 GMT

Hi, you could try [Advanced IP Scanner] after the scan ends there are information about vendors, IP address.
Another option is use the console port then run the commands to get the ip addres.
If the IP scan doesn´t work let me know to get the correct commands to get the ip address configured.

BR

RE: How can I get IP of my APs if I forgot it ?

Ravi_Patel — Mon, 30 Apr 2018 22:27:00 GMT

Hi Ismael,
I tried with Advance IP scanner but still not show up my APs. I got my all scanner in that search as manufacturer Motorola but not my APs.
Can you tell me that console command which you are telling me?
Thank you

RE: How can I get IP of my APs if I forgot it ?

RobertZ — Mon, 30 Apr 2018 22:43:00 GMT

You can try to factory default them if they have a console port with u: reset p: FactoryDefault

RE: How can I get IP of my APs if I forgot it ?

Ravi_Patel — Mon, 30 Apr 2018 22:43:00 GMT

Hi,
That is the last option i want to chose. Because I have 8 APs in working condition and I don't want to reset all them in working days. Is there any other option?

RE: How can I get IP of my APs if I forgot it ?

Ismael1 — Mon, 30 Apr 2018 22:43:00 GMT

Use baud 19200.

localhost login:
AP-51xx Access Point 2.3.4.0-008R
Copyright (c) Motorola, Inc. 2008. All rights reserved.

localhost login: admin
Password:

admin>summary
AP-51xx firmware version : 2.3.4.0-008R
country code : mx
ap-mode : independent
serial number :

WLAN 1:
WLAN name : WLAN1
ESS ID : 101
Radio : 11a,11b/g
VLAN :
Security Policy : Default
QoS Policy : Default

Roam Notification : after-assoc

LAN1 Name: LAN1
LAN1 Mode: enable
LAN1 IP: 0.0.0.0
LAN1 Mask: 0.0.0.0
LAN1 DHCP Mode: client

LAN2 Name: LAN2
LAN2 Mode: disable
LAN2 IP: 192.168.1.1
LAN2 Mask: 255.255.255.0
LAN2 DHCP Mode: server

WAN Interface IP Address Network Mask Default Gateway DHCP Client
------------------------------------------------------------------------------
enable 10.1.1.1 255.0.0.0 0.0.0.0 disable

admin>

OR this commands:

admin>network
admin(network)>lan
admin(network.lan)>show
LAN On Ethernet Port : LAN1
LAN Ethernet Timeout : disable
LAN Reset Interval : disable

802.1x Port Authentication:
Username : admin
Password : ********

Auto-negotiation : enable
Speed : 100M
Duplex : full

** LAN1 Information**
LAN Name : LAN1
LAN Interface : enable
802.1q Trunking : disable
Native VLAN Tag Mode : untagged

LAN IP mode : DHCP client
IP Address : 0.0.0.0
Network Mask : 0.0.0.0
Default Gateway : 0.0.0.0
Domain Name :
Primary DNS Server : 8.8.8.8
Secondary DNS Server : 0.0.0.0
WINS Server : 192.168.0.254

** LAN2 Information**
LAN Name : LAN2
LAN Interface : disable
802.1q Trunking : disable
Native VLAN Tag Mode : untagged

LAN IP mode : DHCP server
IP Address : 192.168.1.1
Network Mask : 255.255.255.0
Default Gateway : 192.168.1.1
Domain Name :
Primary DNS Server : 192.168.1.1
Secondary DNS Server : 192.168.1.1
WINS Server : 192.168.1.254

admin(network.lan)>

BR

RE: How can I get IP of my APs if I forgot it ?

TammyW — Mon, 30 Apr 2018 22:59:00 GMT

If you have the MAC Addresses can you look up the arp table on the routers to get the IPs?

RE: How can I get IP of my APs if I forgot it ?

Ravi_Patel — Mon, 30 Apr 2018 23:11:00 GMT

Hi Ismael,
Advance IP scanner didn't show up my APs but it showed up my scanner connected to APS as manufacturer Motorola. Can you tell me that console port command ?
Thank you

RE: How can I get IP of my APs if I forgot it ?

Ismael1 — Mon, 30 Apr 2018 23:25:00 GMT

admin>summary

or

admin>network
admin(network)>lan
admin(network.lan)>show

br