topic RE: AP7522 Wing Express interface ge1 DOWN in ExtremeWireless (WiNG)

AP7522 Wing Express interface ge1 DOWN

Ronald_Groenewe — Tue, 25 Apr 2017 11:23:00 GMT

I've made a change via the GUI and it has disabled the GE1 by default. So now I cannot access the interface anymore. As the wireless networks are in a different VLAN I'm unable to check the settings in the web interface.
Is there a way to enable interface GE1 again via the CLI?

RE: AP7522 Wing Express interface ge1 DOWN

Wei_Liang_Loh — Tue, 25 Apr 2017 11:35:00 GMT

Hi,

May I know what version is your AP7522E?
If is 5.8.0 and above, it's advise that you connect it using console and factory default it.

Below are username and password for factory default：
Username：reset
Password：FactoryDefault

RE: AP7522 Wing Express interface ge1 DOWN

Ronald_Groenewe — Tue, 25 Apr 2017 12:07:00 GMT

This Ap is on 5.8.6.0-011R so i guess there's only one option... factory default.

RE: AP7522 Wing Express interface ge1 DOWN

Ondrej_Lepa — Tue, 25 Apr 2017 12:51:00 GMT

Hello Ronald,

please be aware there is a recognized bug SPR-31767 related to LAN settings done via GUI.
When you do changes to LAN port, port goes disabled for no reason. If you do not notice this and click apply, GE1 is disabled.

See another thread we sorted this out and let me know if this is same situation or your port went down for other reason.
https://community.extremenetworks.com/extreme/topics/wing-express-lan-settings-disable-by-deaultIf you have any more question just ping us back.

Regards,
Ondrej

RE: AP7522 Wing Express interface ge1 DOWN

Ronald_Groenewe — Tue, 25 Apr 2017 13:03:00 GMT

Hi Ondrej,

This is exactly what happened, I updated the allowed VLANS and it turned the interface OFF.

Should this have been solved in the firmware I'm using?

RE: AP7522 Wing Express interface ge1 DOWN

Ondrej_Lepa — Tue, 25 Apr 2017 13:03:00 GMT

Hi Ronald,

this is unfortunately SwiftUI module related issue and it is not easy to solve this.

As afar as my knowledge goes, fix is planed in WiNG 5.9 which is due to be released during summer.

Regards,
Ondrej

RE: AP7522 Wing Express interface ge1 DOWN

Christoph_S — Tue, 25 Apr 2017 18:48:00 GMT

Hello Ronald,

It is unclear if this is an AP7522E express unit or a standard AP7522 with the Express (Swift) UI. If it's an Express unit meaning AP7522E, then as previously mentioned, it has to be factory reset via the console port; however, if it's a standard AP7522 unit with Express UI, then you can console into it (baud rate 115200) and run the following commands to open the GE1 port:

>en
#self
Enter configuration commands, one per line. End with CNTL/Z.
#int ge 1
#no shut
#com wr

Regards,

Chris

RE: AP7522 Wing Express interface ge1 DOWN

Ronald_Groenewe — Tue, 25 Apr 2017 18:48:00 GMT

it's a 7522E so no self on the console... I'm currently reconfiguring the AP

but I appreciate your input!