topic RE: Access Point still showing on Wireless Controller as offline after being physically removed (WM3400 & AP4600) in ExtremeWireless (WiNG)

Access Point still showing on Wireless Controller as offline after being physically removed (WM3400 & AP4600)

Sean_Tutor — Thu, 03 Dec 2015 22:47:00 GMT

I'm currently using a WM3400 with AP4600s. (4620 in this case) We removed the AP4620 and replaced it, however it still appears on the web interface as offline. Is there a way to remove this AP from the controller so that others won't panic when they see the interface?

RE: Access Point still showing on Wireless Controller as offline after being physically removed (WM3400 & AP4600)

BrandonC — Thu, 03 Dec 2015 23:08:00 GMT

Hi Sean,

If you log into the CLI of the controller, then go into config mode, you can just do 'no ap4600 '. This will delete the device config for this AP.

-Brandon

RE: Access Point still showing on Wireless Controller as offline after being physically removed (WM3400 & AP4600)

Sean_Tutor — Thu, 03 Dec 2015 23:25:00 GMT

Do I need to write to memory or anything else?

RE: Access Point still showing on Wireless Controller as offline after being physically removed (WM3400 & AP4600)

BrandonC — Fri, 04 Dec 2015 00:02:00 GMT

Yes, you will need to commit the changes and then save the config.

RE: Access Point still showing on Wireless Controller as offline after being physically removed (WM3400 & AP4600)

Sean_Tutor — Fri, 04 Dec 2015 01:23:00 GMT

Thanks.  It was still there after I ran the command. For some reason the AP still showed up in the Config tab at which point I realized there's a delete button.... /sigh I deleted it and then commit/write and it went away from the dashboard. Appreciate the help! You can close this ticket!