topic RE: I can't reset the AP in ExtremeWireless (WiNG)

I can't reset the AP

Saravanamurthy_ — Tue, 31 Jul 2018 21:02:00 GMT

Hi,

I am using AP 7522. This Firmware is 5.9.2.1, if i do factory default only reset for IP. not reset for configuration. even login password also not reseted.

above firmware used two AP's. one is VC another one is AP. but Ap is not adopted VC. both are connected same switch. i checked show mint neighbors command. its showing 0 mint.

pls tell me where i did mistake.

RE: I can't reset the AP

Darrel_Rhodes — Tue, 31 Jul 2018 21:05:00 GMT

What method are you using to reset the AP?

RE: I can't reset the AP

Andrew_Blomley — Tue, 31 Jul 2018 21:07:00 GMT

please confirm that you have not enabled a multicast filter on the switch, this is block mint discover

to rest the ap

en
delete startup-config
com w
reload

RE: I can't reset the AP

vanelm — Tue, 31 Jul 2018 21:11:00 GMT

Hello, If password still not affected this eventually means that AP is perfectly adopted by VC or some other controller. Misha

RE: I can't reset the AP

RobertZ — Tue, 31 Jul 2018 22:10:00 GMT

Check if AP is getting adopted with CLI command:

'show adoption status'

RE: I can't reset the AP

Saravanamurthy_ — Tue, 31 Jul 2018 22:20:00 GMT

RE: I can't reset the AP

Yas — Wed, 01 Aug 2018 13:47:00 GMT

RE: I can't reset the AP

Yas — Wed, 01 Aug 2018 13:53:00 GMT

please your mint policy too, may be the mint configuration is disabled on VLAN or IP.

self
no mint mlcp vlan
no mint mlcp IP

check your firewall rules on your switch.

RE: I can't reset the AP

Saravanamurthy_ — Wed, 01 Aug 2018 16:27:00 GMT

Thank u guys