topic Configure RF-Domain based login User in ExtremeWireless (WiNG)

Configure RF-Domain based login User

ARUN_SHARMA — Mon, 28 Oct 2019 02:18:02 GMT

Hi,

Is it possible to create RF-Doamin based login user in VX9000?

For Example:

Suppose I have created 10 RF-Domain for A location and 10 RF-Domain for B location. If I create User A for location A and User B for location B, so that User A cannot see/manage location B access points and vice-versa.

Please let me know the possibility.Please let me know if this is possible through N-Sight either.

Thanks!!!

Regards,

ARUN

Re: Configure RF-Domain based login User

Tomasz — Mon, 28 Oct 2019 18:25:26 GMT

Hi Arun,

I was recently doing similar thing with NSight. Currently can’t check it on WiNG but I suppose it should work similar way:

management-policy default
allowed-location Sites-A locations Site-A1 Site-A2
allowed-location Sites-B locations Site-B1 Site-B2
user Admin-A password whatever role superuser access all allowed-locations Sites-A
user Admin-B password nevermind role superuser access all allowed-locations Sites-B

Hope that helps,

Tomasz

Re: Configure RF-Domain based login User

ckelly — Mon, 28 Oct 2019 21:29:07 GMT

That is correct. Like NSight, you can configure the mgt policy in WiNG to limit users to specified RFDomains.

Re: Configure RF-Domain based login User

ARUN_SHARMA — Tue, 29 Oct 2019 01:57:33 GMT

Hi,

I have followed the suggested way but it is not restricting user as per RF-Domain configured.As per N-Sight this configuration will work on N-Sight only and with firmware version 5.9.4 or above.I have tried with v5.9.6 also but this is not working on controller.Please confirm.

Please find the tree-structure configured on controller FYR.

management-policy default
user Banglore password 1 bbdea67ec2de4efc480a9f13dff7962afef8feadff51ee234e0261ee42015746 role superuser access all allowed-locations India
allowed-location India locations MSILG-BANGLORE-SPD

Please confirm the possibility on controller itself.

Regards,

ARUN

Re: Configure RF-Domain based login User

ckelly — Thu, 31 Oct 2019 00:10:39 GMT

My apologies ARUN.

You are correct though. This multi-tenancy type of feature is only applicable to NSight, unfortunately.

Re: Configure RF-Domain based login User

ARUN_SHARMA — Thu, 31 Oct 2019 00:31:21 GMT

Hi Chris,

Thanks for the clarification.

Please also confirm that can we manage controller configuration from Nsight only like AP adoption,WLAN creation etc.

Re: Configure RF-Domain based login User

ckelly — Thu, 31 Oct 2019 00:42:26 GMT

Arun, No...NSight has zero AP management capability.

Any AP management functions are done directly on the AP or from a WiNG controller.

Re: Configure RF-Domain based login User

ARUN_SHARMA — Thu, 31 Oct 2019 00:50:27 GMT

OK thanks.

One more requirement is to customised event message generated from controller. Can we do that?

Customer want to add some custom information on top of the default event message generated from controller.

Kindly confirm the possibility.