topic Re: Tracking user activity on WiNG APs in ExtremeWireless (WiNG)

Tracking user activity on WiNG APs

cosmingrosu — Fri, 18 Jun 2021 23:54:19 GMT

Hello,

I need to track the user management activity on my comapny’s WLAN. I need to know what users logged onto the controller or APs, which commands they used, along with timestamps. I would also like to know if there;s a way to track what configurations a user made via the controllers GUI interface. I am open to any kind of notifications like syslog, SNMP traps, email, or simply a log on the GUI interface.

Could you please help me with some indications?

The controller is a RFS 4000, the APs are 7522 and 7532 running firmware version 5.9

Thanks,

Re: Tracking user activity on WiNG APs

Ovais_Qayyum — Sat, 19 Jun 2021 00:02:34 GMT

Hi,

The following “service show command-history on <device name>” command should get you what you need; the Location tab will show the ip address and port which is used to access the device.

Regards,

Ovais

Re: Tracking user activity on WiNG APs

Christopher_Fra — Sat, 19 Jun 2021 01:47:17 GMT

Ovais has provided the steps for command line interface and there is nothing similar for UI.

You can create an Event Policy (UI under Configuration > Devices > Event Policy and select event module system. From here, you can use SNMP, Syslog, and/or email notification for logins, config-commit, and config-revision, in order to know the user that did access the system and if there was a config mod pushed, config-revision would be incremented.

Regards,

Chris