topic Auto-provisioning-policy failling in ExtremeWireless (WiNG)

Auto-provisioning-policy failling

OGB-NIKO — Tue, 01 Oct 2019 05:09:44 GMT

Out of no where we have Auto-provisioning-policy failing upon rebooting of any AP ,it puts the AP in to the default container may be it is a setting i am not sure we are using version 5.9.2.

Re: Auto-provisioning-policy failling

Christopher_Fra — Tue, 01 Oct 2019 05:16:33 GMT

Without the configuration, will be tough to answer/resolve the current issue. By default and with "evaluate always" disabled under APP (default setting and should be disabled for most deployments), the APs will only be provisioned the first time they come in. Once provisioned, APs that are rebooted should persist the config, including AP Profile and RF-Domain.

Please provide the config for review and type of deployment.

Re: Auto-provisioning-policy failling

vanelm — Tue, 01 Oct 2019 14:33:06 GMT

Also this often happens when policy is defined but not mapped to controller profile or device

Re: Auto-provisioning-policy failling

OGB-NIKO — Tue, 01 Oct 2019 14:53:42 GMT

By default and with "evaluate always" disabled under APP (default setting and should be disabled for most deployments) ? I have looked for evaluate always to disable and can not find it under default i am running version 5.9.2

Re: Auto-provisioning-policy failling

Christoph_S — Tue, 01 Oct 2019 21:08:23 GMT

You can also try the following

1 - Delete and recreate the Auto provisioning policy. If it's too large and been working well till now, just delete the new rule, save, recreate
2 - Make sure that the policy is mapped to the controller and not the AP profile
3 - Delete the ap from the controller under Configuration >> Devices >> Device configuration >> Select AP >> Delete >> Commit and Save
4 - Reboot AP (you can always reset the AP for good measure)