topic Re: Auto-provisioning rule problem in ExtremeWireless (WiNG)

Auto-provisioning rule problem

EricG — Wed, 08 Dec 2021 16:02:43 GMT

Hi,

I have a problem when I want to create an auto-provisioning rule.
First I created an AP profile for an AP305C.
I can see and select the earlier created profile from the profile name drop down menu.....
Then when I want to create an auto-provisioning rule and select the device type, I can't see the profile anymore in the profile name drop menu.
So, I can see and select the profile from the drop down menu when the device type is not selected first, but it disappears from the drop down menu when I select the device type.

What am I doing wrong?

Re: Auto-provisioning rule problem

Douglas_Novell — Wed, 08 Dec 2021 21:04:50 GMT

Hello,

NOVA UI is suggested when configuring UAP AP305C with WiNGOS. Please see this article for additional details: https://extremeportal.force.com/ExtrArticleDetail?an=000099949

Re: Auto-provisioning rule problem

Christopher_Fra — Wed, 08 Dec 2021 21:20:16 GMT

As Doug mentioned, use NOVA (HTML 5) interface from wireless controller to configure Extreme Universal Access Points (UAP). Otherwise, use CLI (Command Line Interface).

Thanks,
Chris Frazee

Re: Auto-provisioning rule problem

EricG — Thu, 09 Dec 2021 17:31:04 GMT

Thanks for the quick response, as I am a terrible typist and make a lot of mistakes I will look into NOVA 😉