topic Re: Why this AP doesn't have overwrite permission in ExtremeWireless (WiNG)

Why this AP doesn't have overwrite permission

Tuan_Nguyen1 — Sat, 10 Jul 2021 08:28:06 GMT

Hi you

Why this AP doesn't have overwrite permission? All these APs the same version of FW 5.9.2

Re: Why this AP doesn't have overwrite permission

ckelly — Sun, 11 Jul 2021 00:22:10 GMT

Tuan,

The ‘clear overrides’ option is not shown for that AP because the system recognizes that there are no custom (override) settings that have been made to that AP that are different than the AP Profile.

If you make a manual change to an individual AP (NOT a change to the AP Profile), then that change is considered an override (it overrides the setting that exist in the AP Profile - for example, you give an AP a custom hostname or static IP address).

And any time you create override settings on individual APs, WiNG will then show the clear overrides icon. If you then use the icon to clear the overrides, WiNG will then remove those custom settings that you applied to the AP.

Re: Why this AP doesn't have overwrite permission

Tuan_Nguyen1 — Mon, 26 Jul 2021 14:05:22 GMT

Hi you

I can’t turn off band 5Ghz

Re: Why this AP doesn't have overwrite permission

ckelly — Mon, 26 Jul 2021 20:18:47 GMT

According to this error message below, you are attempting to include a channel that isn’t allowed or is invalid.

Can you post your Smart RF policy and the radio-2 configuration for the 7161 (TK01-199) ?

Re: Why this AP doesn't have overwrite permission

Tuan_Nguyen1 — Tue, 27 Jul 2021 09:59:42 GMT

Hi you

How to disable Smart-RF for band 5Ghz?

Re: Why this AP doesn't have overwrite permission

ckelly — Tue, 27 Jul 2021 16:37:14 GMT

Tuan, you can disable Smart RF for each radio individually on an AP by just statically assigning a channel and power setting. If you manually assign a channel or power, it means Smart RF is not used for setting channel and power.