https://community.extremenetworks.com/t5/extremewireless-wing/led-colors-code-for-ap7632/m-p/63146#M5630 I'm having same issue on a stand-alone AP7632e in my homelab.<BR /> Works fine. <BR /> But AP does not reach the configured channel width.<BR /> <BR /> I don't find blink-information in hardware or wing guides. Sat, 11 May 2019 15:25:27 GMT PeterK 2019-05-11T15:25:27Z https://community.extremenetworks.com/t5/extremewireless-wing/led-colors-code-for-ap7632/m-p/63145#M5629 Hi everyone <BR /> <BR /> yesterday I upgrade the firmware for AP7632 in my controller RFS6000 but after upgrade mi AP, it showed a strange behavior, the leds of 2.4Ghz and 5Ghz were always blinked although the controller saw them, did not emit the configured WLAN, any idea of ​​why this, and is there any documentation of the LED color code for this model of AP?<BR /> <BR /> Thanks Sat, 30 Mar 2019 20:52:50 GMT https://community.extremenetworks.com/t5/extremewireless-wing/led-colors-code-for-ap7632/m-p/63145#M5629 mario123na 2019-03-30T20:52:50Z https://community.extremenetworks.com/t5/extremewireless-wing/led-colors-code-for-ap7632/m-p/63146#M5630 I'm having same issue on a stand-alone AP7632e in my homelab.<BR /> Works fine. <BR /> But AP does not reach the configured channel width.<BR /> <BR /> I don't find blink-information in hardware or wing guides. Sat, 11 May 2019 15:25:27 GMT https://community.extremenetworks.com/t5/extremewireless-wing/led-colors-code-for-ap7632/m-p/63146#M5630 PeterK 2019-05-11T15:25:27Z