topic Re: AP310/410/i/e LED description in ExtremeWireless (WiNG)

AP310/410/i/e LED description

MichalK — Fri, 29 Jan 2021 21:35:34 GMT

Hi,

I'm probably missing something but I cannot find LED indicator placement on new APs (310/410). In the installation and quick reference guides is only a table with colour description and "The LED indicators are located on the front face of the access point but are not visibly marked.” note. But which LED is which ???

Regards,

Mike

Re: AP310/410/i/e LED description

Christoph_S — Fri, 29 Jan 2021 23:04:35 GMT

Hello Mike,

This may help:

https://extremeportal.force.com/ExtrArticleDetail?an=000084323

Thank you

Re: AP310/410/i/e LED description

MichalK — Fri, 29 Jan 2021 23:12:45 GMT

That's exactly what I was looking for. Thank you - there is one thing missing, no ? Both AP4xx and AP5xx have 3 radios and the article shows only two (that means it's for AP3xx)

Re: AP310/410/i/e LED description

Christoph_S — Fri, 29 Jan 2021 23:41:29 GMT

Hello Mike,

1 - 2.4 GHz radio

2 - 5 GHz radio

3 - Sensor

Of course you can have Radio Modes SSR, but 3rd radio can’t be either 2.4 or 5 GHz.

Rgds,

Re: AP310/410/i/e LED description

MichalK — Fri, 29 Jan 2021 23:57:10 GMT

https://documentation.extremenetworks.com/wireless/QRG/AP410ie_QuickRef.pdf?_ga=2.132958861.264424451.1611823492-1483736301.1599043077

There are 3 radios and Bluetooth (as Radio 4 in that case?) mentioned. Radio 3 is usually sensor

Re: AP310/410/i/e LED description

MichalK — Wed, 10 Feb 2021 22:58:32 GMT

@Christoph S. there is another thing missing in description: AP Status LED Green blinking - AP is Virtual Controller (or RF domain manager?)

Re: AP310/410/i/e LED description

Christoph_S — Thu, 11 Feb 2021 00:23:40 GMT

Hello Michal,

Just tested, looks like VC status. The LED was blinking green under these conditions:

virtual-controller
no rf-domain-manager capable

Will modify article accordingly.

Thank you,

Chris