topic Re: LED's on AP7532 in ExtremeWireless (WiNG)

LED's on AP7532

hayman — Sat, 06 Apr 2019 22:34:10 GMT

hello everyone,
is there any way that i can turn off the Leds on my 2xAP7532 so that will be nice white on the ciling without led ...?
thanks

Re: LED's on AP7532

Christopher_Fra — Sun, 07 Apr 2019 01:51:47 GMT

From CLI (via controller if AP is adopted or directly from AP in stand-alone mode):

From controller:

enable [enter]
config [enter]
profile ap7532 xxxxxxx [enter] (x represents AP profile)
no led flash-pattern [enter]
com wr [enter]

From AP at device level:

enable [enter]
config [enter]
self [enter]
no led flash-pattern [enter]
com wr [enter]

Re: LED's on AP7532

RobertZ — Sun, 07 Apr 2019 08:16:18 GMT

Re: LED's on AP7532

hayman — Sun, 07 Apr 2019 23:49:23 GMT

thanks for the fast answer i'll try it ...

Re: LED's on AP7532

Christoph_S — Mon, 08 Apr 2019 19:16:43 GMT

Hello Hayman,

Here's a link that you might want to keep handy: https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-physically-locate-an-AP-using-the-LED-flash-sequence

This should include all LED options.

Thank you,

Christoph

Re: LED's on AP7532

hayman — Mon, 08 Apr 2019 22:41:28 GMT

Wow thanks this

Turn LEDs off

Log into the AP via SSH or console port and run the following commands:

code:

>en
#self
#no led
#com wr
[ok]

does the trick thanks alot