topic Overloaded interface vlan1 in NAT config is not present in ExtremeWireless (WiNG)

Overloaded interface vlan1 in NAT config is not present

zlinuxboy — Sun, 22 Aug 2021 22:19:06 GMT

Hi, guys

I delete vlan 1 somewhere when config the ap7522 through WebUI. when commit the config, there is error message:

---
Detail :Not Available
Message :Overloaded interface vlan1 in NAT config is not present
ErrorPath :/wing-config/device[mac=74-67-F7-A1-AE-58]
Severity :error
Type :Application Error
**********************************
---

how to fix it?

Re: Overloaded interface vlan1 in NAT config is not present

Christoph_S — Mon, 23 Aug 2021 19:28:00 GMT

1 - Where did you delete it from (profile or override)?

2 - Do you need vlan 1?

3 - Did you configure another native vlan?

You can very simply reset the AP and start anew. This will assure that all settings are reinstated.

Thank you,

Re: Overloaded interface vlan1 in NAT config is not present

ckelly — Mon, 23 Aug 2021 20:07:36 GMT

zlinuxboy: If you are not already doing so, you likely need to console connect to the AP to fix this.

Once in, you can re-create vlan1 - Or, you can do as stated above and just reset the AP and start over.

Re: Overloaded interface vlan1 in NAT config is not present

zlinuxboy — Mon, 23 Aug 2021 23:22:48 GMT

@Christoph S.

I don’t remember location when delete it.
I don’t need vlan 1, and I have create another vlan as mgt vlan.
Thanks anyway, I have reset the ap to factorydefault, and config it again. the error message just gone.

@Chris Kelly

yes, I config the ap through serial console right now, cli is my favorite.