WiNG tunnel SSID - Do I need configure the tunneled VLAN on interface on controller?

EF — Wed, 26 Dec 2018 17:44:17 GMT

Hi,

I want tunnel one SSID to the controller, and it seems that the only configuration needed is:

bridge vlan XX
bridging-mode tunnel
tunnel-over-level2

In the WLAN, AP and controller, but it´s not working for me and I have some doubts, one , Is the controller needed create the VLAN and assign to ethernet interface in orther to reach the network resources (for example DHCP)?

for example:

vx9000 XX-XX-XX-XX-XX-XX
use profile default-vx9000
use rf-domain "RF LAB"
hostname VX9000-LAB01
license AAP VX-DEMO-16AAP-LICENSE
license ADSEC DEFAULT-ADV-SEC-LICENSE
timezone Europe/Madrid
country-code es
channel-list dynamic
bridge vlan 31
bridging-mode tunnel
tunnel-over-level2
ip default-gateway 10.YYY.XXX.ZZZ
interface ge1
switchport mode trunk
switchport trunk allowed vlan 1-4094
switchport trunk native vlan 70
switchport trunk native tagged
interface vlan1
shutdown
interface vlan31
interface vlan70
description "MGMT VLAN"
ip address 10.YYY.XXX.KKK/24
no use auto-provisioning-policy

Regards,

EF

Re: WiNG tunnel SSID - Do I need configure the tunneled VLAN on interface on controller?

EF — Thu, 27 Dec 2018 04:52:30 GMT

In VX9000 traffic tunneled from users is not supported.

Regards

topic WiNG tunnel SSID - Do I need configure the tunneled VLAN on interface on controller? in ExtremeWireless (WiNG)

WiNG tunnel SSID - Do I need configure the tunneled VLAN on interface on controller?

Re: WiNG tunnel SSID - Do I need configure the tunneled VLAN on interface on controller?