topic Re: Change primary IP address of AP301e in ExtremeWireless (WiNG)

Change primary IP address of AP301e

sropiak — Wed, 27 Jan 2021 20:36:43 GMT

Running the current release of Wing Manager and having trouble finding where I can change the primary IP address of the device. We’re moving all the access points to a different subnet and need to get these changed. Thanks to all who reply.

Steve

Re: Change primary IP address of AP301e

Christoph_S — Wed, 27 Jan 2021 21:52:10 GMT

Hello Steve,

SSH into the AP and run the following command:

#show ip int br

for all AP IP addresses:

From Controller run the following command:

#show wireless ap

#show wireless ap on <rf-domain-name>

From GUI:

A - On controller:

Go to Statistics » Expand System » Expand RF-domain » Select AP » Health » Primary IP

B - Go to Statistics » Expand System » Expand RF-domain » Select the controller » Adoption » Adopted Devices » Click on Device Name » Health » Primary IP

Or if the IP is already statically assigned:

C - Go to Configuration » Devices » Device Configuration » Select AP » Edit » Interface » Virtual Interface » Select Native Vlan » IPV4

I hope this helps

Re: Change primary IP address of AP301e

sropiak — Wed, 27 Jan 2021 22:02:20 GMT

Browser interface says I need Flash. Flash is dead. Distributor said to use the Wing utility. Why doesn’t that let me do this?

Update: Found it in the Wing utility. SSH helped point me to the VLAN section under devices.

Re: Change primary IP address of AP301e

sropiak — Wed, 27 Jan 2021 23:17:14 GMT

For some reason the change I made didn’t stick. Looks like its SSH. So, I see the bridge IP, what’s the command to change it?

Re: Change primary IP address of AP301e

Christoph_S — Wed, 27 Jan 2021 23:24:07 GMT

When you made the change from GUI did you click on OK first then Commit and Save or did you click on Commit and Save without clicking on OK first?

Please provide screen shot of what you mean by bridge IP.

From SSH please run command: #show IP int br and let me know which IP it is that you would like to change

Re: Change primary IP address of AP301e

sropiak — Thu, 28 Jan 2021 02:25:56 GMT

Can’t even get to the login page on the GUI. Get an error saying I need flash.

Re: Change primary IP address of AP301e

Christoph_S — Thu, 28 Jan 2021 02:46:53 GMT

You will need WING-Man for flash access.

Here’s an article on this: https://extremeportal.force.com/ExtrArticleDetail?an=000085391

To download WING-Man you will need:

1 - To have an Extreme Portal account

2 - To contact GTAC and request the download

Thank you

Re: Change primary IP address of AP301e

sropiak — Thu, 28 Jan 2021 02:48:44 GMT

I have the wingman. Where in the GUI is the primary IP address?

Re: Change primary IP address of AP301e

Christoph_S — Thu, 28 Jan 2021 04:03:33 GMT

Hello Steve,

You will find answer in my first reply but here it is again:

From GUI:

A - On controller:

Go to Statistics » Expand System » Expand RF-domain » Select AP » Health » Primary IP

B - Go to Statistics » Expand System » Expand RF-domain » Select the controller » Adoption » Adopted Devices » Click on Device Name » Health » Primary IP

Or if the IP is already statically assigned:

C - Go to Configuration » Devices » Device Configuration » Select AP » Edit » Interface » Virtual Interface » Select Native Vlan » IPV4

Rgds