topic Ap7522 - use an external dhcp to distribute ip to clients in ExtremeWireless (WiNG)

Ap7522 - use an external dhcp to distribute ip to clients

antoniodico — Tue, 13 Oct 2020 17:07:35 GMT

Hello everybody

I am configuring an AP7522 and I don't want to use its DHCP but lean on the windows server, in order to immediately see who is connected. How can I configure it?
As a CLI configuration I'm using the BASIC and not the advanced one ...
thank you so much.

Re: Ap7522 - use an external dhcp to distribute ip to clients

ckelly — Tue, 13 Oct 2020 20:13:07 GMT

So you are simply wanting to configure the AP to *not* use its DHCP service?

If so, then there should be nothing you need to do because the DHCP service is not enabled by default.

Re: Ap7522 - use an external dhcp to distribute ip to clients

antoniodico — Tue, 13 Oct 2020 20:55:39 GMT

ok ..... but to make it distribute (or flounder) the windows server dhcp what should I do ....

in this moment the phases made are:
- static ip configuration of the wan
- "TEST" SSID creation

when the client connects to the wifi TEST says not internt .... and takes private ip.

Shouldn't that of windows go?

Re: Ap7522 - use an external dhcp to distribute ip to clients

Christoph_S — Tue, 13 Oct 2020 22:41:52 GMT

1 - How many vlans have you configured on the AP?

2 - Did you change the ge 1 port to trunk and allow all vlans?

3 - Are all vlans allowed through the switchport the AP is connected to?

4 - Is the correct vlan mapped to the wlan?

5 - If you enter a static IP address on the laptop, can it ping the DHCP server / DGW/ DNS server or anything else for that matter?