topic Re: WiNG AP and RFS controller logging to SSH session in ExtremeWireless (WiNG)

WiNG AP and RFS controller logging to SSH session

chris_slaterwal — Fri, 24 May 2019 16:20:55 GMT

Is there a simple way to get the event-history to display in an SSH session on WiNG APs and RFS controllers? We have a range of APs: AP650 to AP7532/8232.

Re: WiNG AP and RFS controller logging to SSH session

RobertZ — Fri, 24 May 2019 19:40:48 GMT

via CLI command ' show event-history'

Re: WiNG AP and RFS controller logging to SSH session

chris_slaterwal — Fri, 24 May 2019 19:49:56 GMT

Sorry for not explaining myself.

What I had in mind was "display in real time" i.e. immediately as the messages are logged, like the Cisco "terminal monitor" command.

Re: WiNG AP and RFS controller logging to SSH session

Daren_E — Fri, 24 May 2019 19:59:42 GMT

Hi Chris,

By default logging on the AP is disabled.
Once logging is enabled on device assuming you are concerned about seeing logs when in a ssh session.
You can enable log monitor and set viewing level
Example:

code:

VX-LAB#logging monitor ?
  0-7            Logging severity level
  alerts         Immediate action needed           (severity=1)
  critical       Critical conditions               (severity=2)
  debugging      Debugging messages                (severity=7)
  emergencies    System is unusable                (severity=0)
  errors         Error conditions                  (severity=3)
  informational  Informational messages            (severity=6)
  notifications  Normal but significant conditions (severity=5)
  warnings       Warning conditions                (severity=4)