topic How to create a 802.1x wlan auth? in ExtremeWireless (WiNG)

How to create a 802.1x wlan auth?

Matheus_Santana — Thu, 14 Feb 2019 21:32:51 GMT

There is a some reference guide or procedure to create a EAP wlan on wing 5?

Specially the integration of the active directory and the wing radius.

Regards

Re: How to create a 802.1x wlan auth?

Ronald_Dvorak — Thu, 14 Feb 2019 21:36:06 GMT

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-a-Summit-WM3000-for-802-1x-authentication-with-internal-RADIUS-using-LDAP-to-connect-to-a-Windows-Active-Directory-server

Re: How to create a 802.1x wlan auth?

apille — Tue, 19 Feb 2019 20:36:38 GMT

Hi Ronald,

I'm trying to create AD authentication to a specific SSID as well.
Unfortunately the link you specify only gives me "Wrong password" or "Could not connect to network" messages.

1st step I took:
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-802-1x-authentication-with-internal-RADIUS-on-a-Summit-WM3000-series-controller
2nd I did was the configuration using your link.

VX9000 controller is at firmware 5.9.2.3-003R.

Hope you can point me in the right direction.

Kind regards,
Alexander

Re: How to create a 802.1x wlan auth?

Flavio — Wed, 04 Dec 2019 02:41:12 GMT

Hi there.

Any guide on how to do this on WiNG 7.2.1?

I’m trying to configure a dot1x SSID which authenticates against EACEs (Extreme Access Control Engines). I created the AAA Policy with the IPs of the 2 EACS, but then when it comes to configuring the WPA2 part, I can’t find it in the WebUI.

Thanks!

Flavio.