topic Re: Extreme Wing Management Base Interface of Auto-Elected Virtual Controller in ExtremeWireless (WiNG)

Extreme Wing Management Base Interface of Auto-Elected Virtual Controller

blu3nood — Sun, 24 Feb 2019 09:45:06 GMT

Dear Support

Inside the Extreme Wing AP Virtual Controller setting that have 1 setting call Management Base Interface of Auto-Elected Virtual Controller and what IP I should insert. Can any expert help explain on this features settings I totally not understand what IP I should insert.

Re: Extreme Wing Management Base Interface of Auto-Elected Virtual Controller

RobertZ — Sun, 24 Feb 2019 09:59:49 GMT

VC can be elected automatically based on rf-domain manager selection process (lowest MiNT-ID or highest model). Once Virtual Controller is elected it will install virtual management IP address as secondary address and send GARP update to the network.

How To: How to create Virtual Controller redundancy?

Re: Extreme Wing Management Base Interface of Auto-Elected Virtual Controller

blu3nood — Sun, 24 Feb 2019 12:50:25 GMT

Dear Support

Based on my understanding
Management Base Interface of Auto-Elected Virtual Controller is need to insert the same segment virtual IP address then once the AP elected as VC it will hold the virtual IP. Correct me if I wrong

Best Regards
Goh Chee Wong

Re: Extreme Wing Management Base Interface of Auto-Elected Virtual Controller

blu3nood — Sun, 24 Feb 2019 12:58:57 GMT

Dear Support
That 2 options to configure the AP to become VC which article I should follow

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-Virtual-Controller-redundancy

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-turn-a-WiNG-AP-into-a-virtual-controller

Best Regards
Goh Chee Wong