topic AP7632 vs AP650 - NSight 2.4 Ghz Graphs in ExtremeWireless (WiNG)

AP7632 vs AP650 - NSight 2.4 Ghz Graphs

Richard_Augusto — Fri, 11 Jan 2019 22:45:57 GMT

Hello community,

I changed my ap park on site from ap650 to ap7632. This correct?

Number of channel utilization on 2.4 Ghz decrease w/ new AP.

My WiNG Version is 5.9.1.5

Thanks!

Re: AP7632 vs AP650 - NSight 2.4 Ghz Graphs

RobertZ — Fri, 11 Jan 2019 22:53:33 GMT

Did you upgrade firmware at same time you put in the new APs?

Re: AP7632 vs AP650 - NSight 2.4 Ghz Graphs

Richard_Augusto — Fri, 11 Jan 2019 23:04:42 GMT

My limitation on this case is 5.9.1.5. I'm swap new APs 7632, but on 10 sites are running w/ AP650.

Re: AP7632 vs AP650 - NSight 2.4 Ghz Graphs

RobertZ — Fri, 11 Jan 2019 23:14:08 GMT

AP hardware acts differently so the graph maybe ok. Are you experiencing any client connectivity issues?

Ideally you should be on 5.9.2.2 and above, but until you phase all the AP650s your stuck.

Re: AP7632 vs AP650 - NSight 2.4 Ghz Graphs

Richard_Augusto — Sat, 12 Jan 2019 02:35:13 GMT

Hi Robert!

I setup 5 sites with ap7632 (version 5.9.1.5). Many issues (drop connections) observed here.

ap650/7532/7522 w/ 5.9.1.5 operated very stable on vx9000.

5.9.2.2 is best version for ap7632? I can post feedback here after update.

Re: AP7632 vs AP650 - NSight 2.4 Ghz Graphs

Richard_Augusto — Sat, 12 Jan 2019 07:15:32 GMT

Only this for swap... ?

Thanks for Support, Extreme!

Re: AP7632 vs AP650 - NSight 2.4 Ghz Graphs

Richard_Augusto — Fri, 01 Feb 2019 05:56:06 GMT

Hello!

WiNG 5.9.3.1 solves this problem on NSight Graphs.