https://community.extremenetworks.com/t5/extremewireless-wing/nx-5500-basic-setup/m-p/74946#M6914 I read the manual and still could not find the steps for assigning a mangement IP address for the controller all of our APs will be in tunnel mode and vlans created on the controller itself.Can someone enlighten me ?<BR /> <BR /> <BR /> Thank you Tue, 08 Jan 2019 20:26:56 GMT OGB-NIKO 2019-01-08T20:26:56Z https://community.extremenetworks.com/t5/extremewireless-wing/nx-5500-basic-setup/m-p/74946#M6914 I read the manual and still could not find the steps for assigning a mangement IP address for the controller all of our APs will be in tunnel mode and vlans created on the controller itself.Can someone enlighten me ?<BR /> <BR /> <BR /> Thank you Tue, 08 Jan 2019 20:26:56 GMT https://community.extremenetworks.com/t5/extremewireless-wing/nx-5500-basic-setup/m-p/74946#M6914 OGB-NIKO 2019-01-08T20:26:56Z https://community.extremenetworks.com/t5/extremewireless-wing/nx-5500-basic-setup/m-p/74947#M6915 Unlike the RFS6000/7000 controllers, the NX5500 does not have a dedicated management port/interface (me1). By default, IP address 192.168.0.1 is configured on VLAN 1 (management VLAN) for easy access after which you can change to DHCP or whatever IP address you'd like. You can also configure the zeroconfig IP address as a secondary IP address and/or add a secondary IP address to the controller. <BR /> <BR /> There is no 'management' IP address for this controller per se. <BR /> <BR /> Do you need help configuring an IP on a VLAN or assigning a secondary IP address? Tue, 08 Jan 2019 22:00:27 GMT https://community.extremenetworks.com/t5/extremewireless-wing/nx-5500-basic-setup/m-p/74947#M6915 Christoph_S 2019-01-08T22:00:27Z