topic Re: Can't enable VDC on AP7612 WiNG 7.3.0 in ExtremeWireless (WiNG)

Can't enable VDC on AP7612 WiNG 7.3.0

ttl256 — Mon, 04 May 2020 00:06:52 GMT

Hello

I can't enable VDC on AP7612. When trying to create an anyap profile auto-completion doesn’t show the auto option:

ap7612-XXXXXX(config-profile-PROFILE-01)#virtual-controller ? <cr>

Same in the “self” context.

Current software version:

ap7612-FBCAA8#show ver AP7612 version 7.3.0.3-003R

I think it should be possible due to: WiNG_7.3.0_Controller_Access_Point_CLI_Reference_Guide

As it says:

Am I missing something?

Re: Can't enable VDC on AP7612 WiNG 7.3.0

RobertZ — Thu, 07 May 2020 10:23:30 GMT

What do you mean by “I can't enable VDC on AP7612“?

Are you trying to turn the AP7612 into a Virtual Controller?

See below kb articles:

How to turn a WiNG AP into a virtual controller

Can a WiNG virtual controller adopt different model (heterogeneous) as well as Express APs?

How to create Virtual Controller redundancy?

Re: Can't enable VDC on AP7612 WiNG 7.3.0

ttl256 — Thu, 07 May 2020 13:59:30 GMT

Hello Robert

I meant DVC - dynamic virtual controller. Sorry about that.

I want to implement virtual controller redundancy in AP7612 environment. However I can’t configure virtual-controller auto as well as set management IP address since I don’t have this option in the profile context. All I can do is virtual-controller.

According to the CLI reference guide for WiNG 7.3.0 AP7612 should support this functionality.

My unsuccessful attempts to configure Dynamic Virtual Controller