Report - Select Shutdown On or Off?

Richard_Augusto — Fri, 29 Nov 2019 03:27:53 GMT

Hello!!

See this scenary:

-----------------------------------------------------------------------------------------------
!### show smart-rf select-shutdown on "RF-CIDADE-NOVA"
--------------------------------------------------------------------------------
RADIO RADIO-MAC STATE
--------------------------------------------------------------------------------
AP-CIDADE-NOVA-04-CAIXAS:R1 B8-50-01-7D-E3-50 On
AP-CIDADE-NOVA-01-VITRINE:R1 B8-50-01-50-4B-80 On
AP-CIDADE-NOVA-07-SAC:R1 B8-50-01-4F-5F-C0 On
AP-CIDADE-NOVA-12-ALMOX-FRENTE:R1 94-9B-2C-08-DE-C0 On
AP-CIDADE-NOVA-02-LAVADORAS:R1 B8-50-01-7E-E3-00 On
AP-CIDADE-NOVA-03-PNEUS:R1 B8-50-01-7D-E4-00 On
AP-CIDADE-NOVA-10-BERCOS:R1 B8-50-01-7E-00-F0 On
AP-CIDADE-NOVA-05-AUTOSSERVICO:R1 B8-50-01-50-5B-50 On
AP-CIDADE-NOVA-06-BRINQUEDOS:R1 94-9B-2C-08-D0-80 On
AP-CIDADE-NOVA-13-ALMOX-FUNDO:R1 94-9B-2C-08-DC-80 On
AP-CIDADE-NOVA-08-MESAS:R1 B8-50-01-7D-E5-D0 On
AP-CIDADE-NOVA-09-LOTERIA:R1 B8-50-01-7D-E6-90 On
--------------------------------------------------------------------------------

smart-rf-policy SMART-SHOP-CIDADE-NOVA
assignable-power 5GHz max 15
assignable-power 5GHz min 12
assignable-power 2.4GHz max 14
assignable-power 2.4GHz min 9
channel-list 5GHz 36,40,44,48,149,153,157,165
channel-width 5GHz 20MHz
no select-shutdown

Question:

Why state select shutdown are on when smart rf policy is “no” ?

WiNG Version : 5.9.3.3 and 5.9.6.0

Re: Report - Select Shutdown On or Off?

ckelly — Mon, 02 Dec 2019 22:45:21 GMT

Richard,

The select-shutdown feature is intended for High-density deployment designs focused on 5GHz coverage with the objective of identifying redundant 2.4GHz radios and disabling them, thus reducing the overall CCI (Co-Channel Interference ).

In your configuration:

mart-rf-policy SMART-SHOP-CIDADE-NOVA
assignable-power 5GHz max 15
assignable-power 5GHz min 12
assignable-power 2.4GHz max 14
assignable-power 2.4GHz min 9
channel-list 5GHz 36,40,44,48,149,153,157,165
channel-width 5GHz 20MHz
no select-shutdown

The “no select-shutdown” entry means that you are NOT using the select-shutdown function. In this case, all 2.4GHz radios (radio-1) will be operational all the time.

The “On” STATE for each of those APs means that radio-1 (2.4GHz) is currently *on*. This is expected and correct if the select shutdown feature is disabled (which is the case for you. “no select-shutdown”)

topic Report - Select Shutdown On or Off? in ExtremeWireless (WiNG)

Report - Select Shutdown On or Off?

Re: Report - Select Shutdown On or Off?