https://community.extremenetworks.com/t5/extremewireless-wing/i-cant-access-my-ap-7255-from-gui-after-configuring-new-vlan/m-p/79690#M7351 Hello Sushant,<BR /> You will need to access the VC AP via console (baud 115200 and all other settings default) and after login, review the running-config and verify setting are valid:<BR /> <BR /> <B>enable</B> [enter]<BR /> <B>show run</B> [enter]<BR /> <BR /> If the APs are under contract entitlement, you may want to call our support center at 800-872-8440 and get a support case generated for assistance. Fri, 07 Jun 2019 01:18:02 GMT Christopher_Fra 2019-06-07T01:18:02Z https://community.extremenetworks.com/t5/extremewireless-wing/i-cant-access-my-ap-7255-from-gui-after-configuring-new-vlan/m-p/79689#M7350 I can’t access my AP 7255 controller since I have created a new vlan. All the other access point which were connected and had static IP are now taking IP through dhcp and I cannot access my controller and can’t ping it either. Fri, 07 Jun 2019 01:10:41 GMT https://community.extremenetworks.com/t5/extremewireless-wing/i-cant-access-my-ap-7255-from-gui-after-configuring-new-vlan/m-p/79689#M7350 Sushant 2019-06-07T01:10:41Z https://community.extremenetworks.com/t5/extremewireless-wing/i-cant-access-my-ap-7255-from-gui-after-configuring-new-vlan/m-p/79690#M7351 Hello Sushant,<BR /> You will need to access the VC AP via console (baud 115200 and all other settings default) and after login, review the running-config and verify setting are valid:<BR /> <BR /> <B>enable</B> [enter]<BR /> <B>show run</B> [enter]<BR /> <BR /> If the APs are under contract entitlement, you may want to call our support center at 800-872-8440 and get a support case generated for assistance. Fri, 07 Jun 2019 01:18:02 GMT https://community.extremenetworks.com/t5/extremewireless-wing/i-cant-access-my-ap-7255-from-gui-after-configuring-new-vlan/m-p/79690#M7351 Christopher_Fra 2019-06-07T01:18:02Z