topic ADSP SNMP Polling in ExtremeWireless (WiNG)

ADSP SNMP Polling

Sazon — Wed, 15 Jun 2022 11:54:46 GMT

Hi Extreme Community,

We configured standard SNMP configuration on ADSP controller and Juniper switch, but when we checked the SNMP discovery for the network switch is not polled on ADSP controller. Please help.

Screenshot.

Re: ADSP SNMP Polling

RobertZ — Thu, 16 Jun 2022 15:09:15 GMT

Can you perform an SNMP walk from the AirDefense CLI to the switch?

ssh to the AirDefense via putty using smxmgr credentials
command "letmeout" will break you out of the ADSPadmin script

here is the standard smmpwalk you will need to run it in sudo

snmpwalk -v3 -u [SNMPv3 user] –a (MD5|SHA) -A [passcode] -l [set-security-level] –X <encryption_password> deviceIP <OID> .

-u : is the snmp v3 user.

-A : is the passcode.

-l : is the authentication mode [noAuthNoPriv|authNoPriv|authPriv].

-a : is the authentication protocol (MD5|SHA).

-m ALL (if no OID)

EX for a default extreme networks setup:

sudo snmpwalk –v3 –u snmpmanager –a MD5 –A admin –l authPriv –X admin123 10.10.10.1–m ALL

Re: ADSP SNMP Polling

Sazon — Fri, 17 Jun 2022 06:45:58 GMT

Hi Robert,

Thank you for the info you shared. Currently I tried to poll Extreme Switch and it worked. I'll check SNMP walk to our 3rd party brand later and see if what is wrong.

Best Regards,
Gerald