topic Re: AP7632 GUI error 403 in ExtremeWireless (WiNG)

AP7632 GUI error 403

Flavio — Fri, 03 Apr 2020 15:45:54 GMT

Hi there.

I factory reset an AP7632 which was previously adopted by a VX9000 controller. Now I’d like to configure this AP as a VC, but I cannot connect to the GUI. It says “403 - Forbidden” and I’ve already enabled http and https in the management profile.

I’m running version 7.3.0.0-038R

Thanks in advance for your help!

Flavio.

Re: AP7632 GUI error 403

vanelm — Fri, 03 Apr 2020 17:00:04 GMT

Hello,

Access points firmware image coming from controller during upgrade does not include GUI. So the best way is follow the vc setup guide using CLI. Another option is manually upgrade AP with full image - without "-LEAN-" in a file name.

I would highly recommend to use 5.9.3.x or 5.9.4.x latest for upgrading AP7632 to avoid client association and roaming problems. Use 7.x branch only if .ax stuff involved.

Regards,

Misha

Re: AP7632 GUI error 403

Flavio — Fri, 03 Apr 2020 18:39:43 GMT

Hi Misha - thanks for your reply.

AFAIU, it would’ve worked if I had installed the “not-LEAN” image version 7.3, right?

Another thing: why are you talking about client association and roaming problems? Are there known problems on WiNG 7.3?

Thanks and regards,

Flavio.

Re: AP7632 GUI error 403

Christoph_S — Fri, 03 Apr 2020 21:06:57 GMT

Hello Flavio,

7.x is recommended mostly for AX APs. The recommended version for this AP is the latest 5.9 version hence 5.9.7.1. Loading a full version of this firmware will resolve your issue.

I hope this helps,

Thank you,

Chris