https://community.extremenetworks.com/t5/extremewireless-wing/tx-management-rate/m-p/81812#M7560 <P>Hi Wojciech,</P> <P>you do have different options to do so.<BR />The basic (mandatory) and optional data rates can be configured either on a radio (then the setting will apply to all WLANs mapped to the radio) or for a WLAN profile.<BR />The CLI command for setting the rates on a radio is:</P> <P>data-rates custom basic-24 36 48 54 mcs0-31</P> <P>This will set 24 Mbps to basic (and lowest data rate) and will enable all other data rates as optional.<BR /><BR /></P> <P>The CLI command for setting the rates on a WLAN profile is:</P> <P>data-rates 2.4GHz custom basic-24 36 48 54 mcs0-31 or<BR />data-rates 5GHz custom basic-24 36 48 54 mcs0-31</P> <P>This will set 24 Mbps to basic (and lowest data rate) and will enable all other data rates as optional.</P> <P><BR /><BR />Best regards,<BR />Angelo</P> <P></P> Thu, 24 Feb 2022 14:57:03 GMT Angelo_Cargnel 2022-02-24T14:57:03Z https://community.extremenetworks.com/t5/extremewireless-wing/tx-management-rate/m-p/81811#M7559 Hi,<BR />Couple days ago we had our site with AP310Es surveyed. The suggestion that came up after is, that we should increase our Tx management rate to 24Mbit/s. Can you please point me where I can find it in the WiNG controller? I can't locate it anywhere... Wed, 23 Feb 2022 12:15:54 GMT https://community.extremenetworks.com/t5/extremewireless-wing/tx-management-rate/m-p/81811#M7559 WojciechS 2022-02-23T12:15:54Z https://community.extremenetworks.com/t5/extremewireless-wing/tx-management-rate/m-p/81812#M7560 <P>Hi Wojciech,</P> <P>you do have different options to do so.<BR />The basic (mandatory) and optional data rates can be configured either on a radio (then the setting will apply to all WLANs mapped to the radio) or for a WLAN profile.<BR />The CLI command for setting the rates on a radio is:</P> <P>data-rates custom basic-24 36 48 54 mcs0-31</P> <P>This will set 24 Mbps to basic (and lowest data rate) and will enable all other data rates as optional.<BR /><BR /></P> <P>The CLI command for setting the rates on a WLAN profile is:</P> <P>data-rates 2.4GHz custom basic-24 36 48 54 mcs0-31 or<BR />data-rates 5GHz custom basic-24 36 48 54 mcs0-31</P> <P>This will set 24 Mbps to basic (and lowest data rate) and will enable all other data rates as optional.</P> <P><BR /><BR />Best regards,<BR />Angelo</P> <P></P> Thu, 24 Feb 2022 14:57:03 GMT https://community.extremenetworks.com/t5/extremewireless-wing/tx-management-rate/m-p/81812#M7560 Angelo_Cargnel 2022-02-24T14:57:03Z