topic Re: multicast RFS7k in ExtremeWireless (WiNG)

multicast RFS7k

Phil_storey — Thu, 28 May 2020 19:57:04 GMT

I have been asked a question to which I do not know the answer. There are 2 RFS7K units ( primary / backup with 22 AP7532, there are 3 WLANS one we use for company mobile phones / email on the mobile phones and VOIP,

The Question is

multicast setting, consider checking is on the wireless controller. to determine if the RFS is converting Multicast to unicast on the air ?

How to tell ? and are there any good adjustment to improve VOIP traffic ?

Regards

Re: multicast RFS7k

ckelly — Thu, 28 May 2020 20:39:48 GMT

Phil,

MC-to-UC conversion is happening by default via the applied Radio QoS Policy in the Wireless section. The default Radio QoS Policy is setup to convert already, but several parameters can be adjusted to alter its behavior. This Radio QoS Policy is applied individually to each radio within an AP Profile. In the GUI, it’s in the Radio Settings tab of each radio (radio1, radio2)

Look here for VoIP information.

Re: multicast RFS7k

Phil_storey — Thu, 28 May 2020 21:57:00 GMT

Thanks Chris