topic Re: How to reset the password on NX5500 without affect configurations? in ExtremeWireless (WiNG)

How to reset the password on NX5500 without affect configurations?

hh66 — Thu, 31 Dec 2020 10:33:26 GMT

How to reset the password on NX5500 without affect configurations?

Re: How to reset the password on NX5500 without affect configurations?

Ovais_Qayyum — Fri, 01 Jan 2021 01:11:11 GMT

hh66,

If you have forgotten the password and there is no way to recover it, then you can’t reset/change the password without resetting the controller to the factory default. Resetting the controller to the factory setting will erase all the configuration on it.

To reset the controller, use the following:

Username: reset

Password: FactoryDefault

Regards,

Ovais

Re: How to reset the password on NX5500 without affect configurations?

Christoph_S — Tue, 05 Jan 2021 02:25:22 GMT

Hello hh66,

To add to what Ovais said, you can only use the reset/FactoryDefault credentials via console. They will not work via SSH.

If you have a saved startup config, start by either changing the admin account password or by creating a new account in the management policy. Then reset the controller per above instructions and reload the modified startup config and log in using the new credentials you created.

Hope this helps.

Chris