AP7522 enable Mesh, unavailable GUI

Alexandr_P — Wed, 06 Feb 2019 15:01:20 GMT

Hi, all!

Trying configure Mesh with 2 * AP7522.
WiNG 5.9.3.1.

After enable Mesh, GUI on both AP's became unavailable.
ap7522(config-management-policy-default)#show context
management-policy default
telnet
no http server
https server
rest-server
ssh

Also, after disable SSID:
ap7522-19DD9C#show running-config wlan WiNG\ Test
wlan "WiNG Test"
ssid "WiNG Test"
vlan 1
bridging-mode local
encryption-type ccmp
authentication-type none
no broadcast-ssid
no client-client-communication
no fast-bss-transition over-ds
wpa-wpa2 psk 0 123456789
use wlan-qos-policy "WiNG Test"
SSID still available.

Thank you!

Re: AP7522 enable Mesh, unavailable GUI

Christoph_S — Wed, 06 Feb 2019 21:48:48 GMT

Hello Alexandr,

In regards to the first part of your question (mesh), so if you disable mesh do you have access to GUI on both APs? It's only when you enable mesh that you lose GUI access?

For the second part of your question add the following command to the WLAN:
#no answer-broadcast-probes

This should do it.

Thank you,

Chris

topic Re: AP7522 enable Mesh, unavailable GUI in ExtremeWireless (WiNG)

AP7522 enable Mesh, unavailable GUI

Re: AP7522 enable Mesh, unavailable GUI