topic RE: How to switch off LED of a single AP 7522 permanently ? in ExtremeWireless (WiNG)

How to switch off LED of a single AP 7522 permanently ?

info_systemhaus — Sat, 04 Nov 2017 12:50:00 GMT

I have s small private customer solution with 5x AP7522, without central Controller.
one of the AP´s is the virtual Controller.

customer demands that we switch of the LED´s on the AP´s permanently, he don´t want to have

any blinking or flashing.

As per CLI Reference there is a command .. #NO LED for Profiles.

I tried to select the AP via CLI and his mac address and set this command .. "no success"

I tried to select the builtin AP 7522 Profile and set this command "no success"

i made a "commit" and reload .. "no success"

where is my fault ?

I can not imagine, that is not possible on such a professional AP to Switch off the LED´s ...

Regards

Chris

RE: How to switch off LED of a single AP 7522 permanently ?

Bastian_Sprotte — Sat, 04 Nov 2017 18:12:00 GMT

Chris,

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-physically-locate-an-AP-using-the-L...

can you review that article

also have you test if you login on the AP to use the NO LED command.

Bastian
-

RE: How to switch off LED of a single AP 7522 permanently ?

JESUS_REYES_DIA — Sat, 04 Nov 2017 18:16:00 GMT

Hello , turn off Is possible, but you should not apply over the profile, you should apply over config ap7522 Mac Device.

RE: How to switch off LED of a single AP 7522 permanently ?

Andrew_Webster — Sat, 04 Nov 2017 19:14:00 GMT

The correct format for the command to disable LED via the CLI is:

If you want to disable LED on ALL APs, you need to know the name of the profile applied to the APs, default-ap7522 would be it unless you made changes:
conf profile ap7522 name-of-your-profile
no led
commit write
If you want to disable LED on a single AP:
conf ap7522 mac-address-of-AP
no led
commit write
You might need to remove overrides if you've introduced local AP configs and the profile isn't working as expected:
conf ap7522 mac-address-of-AP
remove-override led
commit write

RE: How to switch off LED of a single AP 7522 permanently ?

RobertZ — Mon, 06 Nov 2017 08:41:00 GMT

If you prefer to use the GUI but are running the enterprise UI follow the below:

configuration --> system profile --> advanced --> miscellaneous -->LEDs --> select 'off'

RE: How to switch off LED of a single AP 7522 permanently ?

RobertZ — Mon, 06 Nov 2017 08:41:00 GMT