topic Re: 310i adopted issue in ExtremeWireless (WiNG)

310i adopted issue

Malik — Mon, 06 Mar 2023 12:28:28 GMT

I currently possess an NX-5500 controller and have previously successfully adopted 310i APs to this controller. However, I have encountered an issue when attempting to adopt a new 310 AP to the same controller, as it is not being recognized.

To adopt the APs to the controller, I have utilized the following command sequence:

#self
#controller host XXX.XXX.XXX.XXX level 1
#wr Commit

Re: 310i adopted issue

Christoph_S — Mon, 06 Mar 2023 13:10:27 GMT

Hello Malik,

What firmware version are you on and is the AP model AP310-1?

Whatever the case, make sure that you are on 7.7.1.5 firmware at least.

Do you have enough licenses?

Can the AP ping the controller?

BR,

Re: 310i adopted issue

Malik — Tue, 07 Mar 2023 08:03:01 GMT

Hello Christoph_S

The newly installed access point is running version 7.7.1.0-005R. However, the older access point is currently operating on version 7.5.1.0-015R, has already been adopted by the controller, and is functioning properly. Additionally, I possess the necessary Enaph license and have confirmed successful communication between the access point and the controller via pinging.

BR,

Malik

Re: 310i adopted issue

Christoph_S — Tue, 07 Mar 2023 13:20:17 GMT

Hello Malik,

Please reach out to us and open a case so that we may investigate issue.

BR,