topic Re: AP505i GUI issues after firmware update in ExtremeWireless (WiNG)

AP505i GUI issues after firmware update

pkeats — Mon, 06 Mar 2023 07:08:10 GMT

Hi, I've just done a firmware update to 7.9.0.0, rebooted and can no longer access the gui on either html or extreme manager. I can log into AP using SSH and all looks good. I don't think the update was corrupt as it boots up and shows the correct working version.

any help would be appreciated. I'm slowly working through configuring over CLI.

Re: AP505i GUI issues after firmware update

Christoph_S — Mon, 06 Mar 2023 13:20:15 GMT

Hello pkeats,

GUI is no longer supported on these APs in this firmware version. You will have to configure the AP via CLI as you are doing, unless they are adopted by a controller.

BR,

Re: AP505i GUI issues after firmware update

pkeats — Mon, 06 Mar 2023 21:54:48 GMT

Hi Chris, so having spent many hours learning how to configure using CLI and I'm glad to say successfully. I now have a working AP, this time the 2,4Ghz radio is working perfectly which was my original question on another thread. For info the I've discovered the GUI does work through Ex WiNG Manager with a line entry on CLI that allows HTTP and Not HTTPS, which I couldn't get to work.

Re: AP505i GUI issues after firmware update

oxoyoz — Thu, 09 Mar 2023 07:02:39 GMT

So you said you can access GUI of AP505i that's running 7.9.0.0 firmware by allowing HTTP access (less secure) but banning HTTPS access to the access point?

I have an AP510E and noticed the same problem (cant access GUI) so I downgraded to 7.7.1.5