topic Re: can AP7522 be act as controller when mutiple RF domain existed. in ExtremeWireless (WiNG)

can AP7522 be act as controller when mutiple RF domain existed.

zlinuxboy — Wed, 06 Aug 2025 13:16:03 GMT

I have multiple RF domain on different area. but doesn't have RFS, NX controller, I would like to utilize one or two ap7522 to be act as controller for consolidate configuration, any possible?

Re: can AP7522 be act as controller when mutiple RF domain existed.

Angelo_Cargnel — Thu, 07 Aug 2025 14:21:09 GMT

Hi,

this is officially not supported.
But it will work, but you have to create the whole configuration in the CLI, as the WebGUI will not support this.

Regards,
Angelo

Re: can AP7522 be act as controller when mutiple RF domain existed.

Daren_E — Thu, 07 Aug 2025 14:24:21 GMT

VC AP deployment does not support multiple RF-domains.
For this type setup a VX or NX controller will be needed.

Re: can AP7522 be act as controller when mutiple RF domain existed.

zlinuxboy — Fri, 08 Aug 2025 06:24:39 GMT

could you elaborate more detail? @Angelo_Cargnel

Re: can AP7522 be act as controller when mutiple RF domain existed.

Angelo_Cargnel — Fri, 08 Aug 2025 07:12:12 GMT

You have to configure multiple rf-domains and if needed different profiles in the CLI.
Then you need a auto provisioning policy which will assign the rf-domain and the profile to the AP once they adopt to the virtual controller. The auto provisioning policy needs to be mapped to the virtual controller.