topic Re: AP305cx continuosly reboots in ExtremeWireless (WiNG)

AP305cx continuosly reboots

marconet_22 — Mon, 08 Sep 2025 15:49:44 GMT

I have an AP305cx with unknown mode.

It reboots continously and i can press "s" to stop boot but It goes to pine mode pine>

set_hwSomeone know cli command in pine mode?

I can't have set_hw_bootos wing7 because i need to go in diag mode.

Someone can help me?

Re: AP305cx continuosly reboots

RobertZ — Tue, 09 Sep 2025 17:42:43 GMT

If you can not recover the AP after a factory reset, then it will need to be sent in for RMA.

1. Reset via reset button.

-The reset button allows you to reboot the device or reset the AP to its factory default settings. Insert a paper clip, or something similar, into the Reset pinhole and press the reset button. To reboot the device, hold the button down for 5 seconds. To return the configuration to the factory default settings, hold it down for at least 10 seconds. After releasing the button, the Power LED goes dark, and then glows steady amber while the firmware loads and the system performs a self-test. After the software finishes loading, the Power LED glows steady green.

Re: AP305cx continuosly reboots

marconet_22 — Wed, 10 Sep 2025 06:38:43 GMT

aren't there any manuals explain commands in pine mode?

In this mode, i get list of commands and it could do something but i don't know how can use it

Re: AP305cx continuosly reboots

marconet_22 — Wed, 10 Sep 2025 14:42:22 GMT

someone know diag password?

Re: AP305cx continuosly reboots

RobertZ — Wed, 10 Sep 2025 17:35:42 GMT

There is, however, that is proprietary and not available to the public. Your best bet is to factory reset AP. If it does not recover, please send it for RMA.