AP460e

Kartik — Wed, 24 Sep 2025 11:43:09 GMT

AP460e regulatory issue found on 5Ghz radio also AP do not transmit full power to 2.4Ghz radio. Showing less dbm eg..10 dbm. Kindly help

Re: AP460e

Christopher_Fra — Wed, 24 Sep 2025 16:23:42 GMT

Hello Kartik,

Can you please provide the full model number and the running-config from the AP460e

Re: AP460e

Kartik — Fri, 26 Sep 2025 02:56:42 GMT

The model number is AP460e WR

Here is the running configuration

admin@10.136.142.29's password:

ap460-D9B16C>show run

! Configuration of AP460 version 7.9.6.1-003R

version 2.7

client-identity-group default

load default-fingerprints

ip access-list BROADCAST-MULTICAST-CONTROL

permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"

permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit D HCP replies"

deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-descriptio n "deny windows netbios"

deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"

deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP l ocal broadcast"

permit ip any any rule-precedence 100 rule-description "permit all IP traffic"

mac access-list PERMIT-ARP-AND-IPv4

permit any any type ip rule-precedence 10 rule-description "permit all IPv4 tra ffic"

permit any any type arp rule-precedence 20 rule-description "permit all ARP tra ffic"

ip snmp-access-list default

permit any

firewall-policy default

no ip dos tcp-sequence-past-window

no stateful-packet-inspection-l2

ip tcp adjust-mss 1400

mint-policy global-default

meshpoint-qos-policy default

wlan-qos-policy default

qos trust dscp

qos trust wmm

radio-qos-policy default

wlan wlan1

ssid JEIM_FMS

vlan 1

bridging-mode local

encryption-type ccmp

authentication-type none

wpa-wpa2 psk 0 ping 169.254.177.108 -t

meshpoint FMS-MESH

meshid 1

beacon-format mesh-point

control-vlan 1

allowed-vlans 1

neighbor inactivity-timeout 60

data-rates 2.4GHz gn

data-rates 5GHz an

security-mode none

root

smart-rf-policy default

assignable-power 5GHz max 20

assignable-power 5GHz min 16

assignable-power 2.4GHz max 20

assignable-power 2.4GHz min 16

no select-shutdown

no smart-sensor

smart-sensor auto-trigger

smart-sensor band smart-band-5GHz

smart-sensor tri-radio-only

management-policy default

telnet

no http server

https server

rest-server

ssh

ssh enable-weak-mac-algo 1

user admin password 1 89b8e97a75cfce3cf560641d7f43141c492d16b650c93a4426a137b39 cd999ea role superuser access all

snmp-server community 0 private rw

snmp-server community 0 public ro

snmp-server user snmptrap v3 encrypted des auth md5 0 admin123

snmp-server user snmpmanager v3 encrypted des auth md5 0 admin123

profile ap460 default-ap460

autoinstall configuration

autoinstall firmware

crypto ikev1 policy ikev1-default

isakmp-proposal default encryption aes-256 group 2 hash sha

crypto ikev2 policy ikev2-default

isakmp-proposal default encryption aes-256 group 2 hash sha

crypto ipsec transform-set default esp-aes-256 esp-sha-hmac

crypto ikev1 remote-vpn

crypto ikev2 remote-vpn

crypto auto-ipsec-secure

crypto load-management

crypto remote-vpn-client

interface radio1

channel 13w

power 30

data-rates gn

placement outdoor

wlan wlan1 bss 1 primary

meshpoint FMS-MESH bss 2

wireless-client tx-power 20

antenna-mode 2x2

no 11axSupport

interface radio2

channel 161ww

power 30

data-rates an

placement outdoor

wlan wlan1 bss 1 primary

meshpoint FMS-MESH bss 2

wireless-client tx-power 20

antenna-mode 4x4

no 11axSupport

interface radio3

interface bluetooth1

shutdown

mode le-sensor

interface ge1

interface ge2

interface vlan1

ip address 10.136.142.29/25

ip dhcp client request options all

use ip-access-list in BROADCAST-MULTICAST-CONTROL

interface pppoe1

use firewall-policy default

use client-identity-group default

logging on

controller host 10.136.142.25 pool 1 level 1

controller vlan 1

controller hello-interval 1 adjacency-hold-time 2

service pm sys-restart

router ospf

meshpoint-device FMS-MESH

root

preferred interface 5GHz

monitor critical-resource action no-root

monitor primary-port-link action no-root

path-method uniform

exclude wired-peer mint-level-1

acs priority-meshpoint 5GHz FMS-MESH

acs priority-meshpoint 2.4GHz FMS-MESH

adoption-mode controller

rf-domain default

location "FMS CONTROL ROOM"

contact kartikl@vareli.co.in

timezone Asia/Calcutta

country-code in

use smart-rf-policy default

ad-wips-wireless-mitigation disable

ad-wips-wired-mitigation disable

ap460 00-E6-0E-D9-B1-6C

use profile default-ap460

use rf-domain default

hostname ap460-D9B16C

no lci-config

interface radio1

ldpc

interface radio2

ldpc

no adoption-mode

end

Re: AP460e

evelyn69mohr — Fri, 26 Sep 2025 10:21:39 GMT

For the AP460e, the 5GHz radio's regulatory issue might require a firmware update to resolve, as this often addresses country-specific power limits. To fix the 2.4GHz radio's low transmit power (10 dBm), check and adjust the channel and transmit power settings in the access point's configuration.

Re: AP460e

Christopher_Fra — Fri, 26 Sep 2025 17:23:24 GMT

Hello Kartik,

Can you please provide the regulatory error (screen shot/output) you are seeing? Is this AP using external antenna's? If so, I don't see any "antenna-gain" configured at the AP Profile and/or Device Level. You will need to see what antenna-model you have and configure the "antenna-gain".

You can download the latest antenna-guide from the following URL: https://supportdocs.extremenetworks.com/support/documentation/antennaguides/

The radios have a static power of 30dBm. You may want to open a support case, in order that we can assist live on this issue. Please call 1-800-872-8440, if you have support entitlement.

Thanks,

Chris Frazee

topic Re: AP460e in ExtremeWireless (WiNG)

AP460e

Re: AP460e

Re: AP460e

Re: AP460e

Re: AP460e